Kuppersbusch USA kc_906 Your appliance at a glance, Using the cook top, Sensor sensivity reset

Page 5

Your appliance at a glance

EKE 854.1

KC 906.2

EKE 804.2

EKE 604.2

1Dual circuit cooking zone

2Sensor buttons for cooking settings

3Off-sensor

4Stand-by-Sensor

5Child proof lock (sensor-lock)

6Normal cooking zone

7Normal cooking zones, usably as a frying zone

8Frying zone

Using the cook top

[Read the safety instructions!

Sensor sensivity reset

Important:

There must be no objects on the sensors while the sensor sensitivity is being set.

ΦAfter initial connection and after a power failure the abbreviations “'%0” appears briefly in the LED displays. Then rotating circles are dis-

played. This means that the sensors are being checked in a self-test and at the same time the button sensitivity reset.

–Acknowledge this display by touching the Off-sensor.

Be sure that no objects are lying on the sensors! These symbols are switched off immediately.

–Otherwise remove objects and disconnect the cooking zone again briefly from the main power source.

Switch on a cooking zone (Stand-by-mode)

ΦIf you start to use a cooking zone, the cook top must be first set into the stand-by mode before you can activate the cooking zone.

ΦWhen you turn the cooking surface on, you will hear a short buzzing noise as it heats. This is design-specific and does not affect the quality and

operation of the appliance.

–Press the sensor-button for approx. 2 seconds.

The LED-display above the sen- sor lights up and the appliance is in operation (stand-by mode).

The stand-by mode automatically switches itself off,

–if no cooking zone is activated within 20 seconds (after 10 seconds an acustic signal indicates that the appliance switches itself off after another 10 seconds)

or

– if the appliance is not used 1 minute after starting operation.

The cooking setting

You have 9 cooking settings available.

Cooking setting

Suitable for

 

 

1-3

Heating, warming, browning, defrosting

 

 

4-5

Steaming, poaching, boiling

 

 

6-8

Roasting, deep-frying

 

 

9

Heating large quantities

 

 

Select the required cooking setting with the plus- or minus-sensor. It will be indicated in the display.

Using the minus-sensor, you start with a boost. If you use the plus-sensor, you start without a boost.

KC 906.2 and EKE Users Guide USA

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents User’s guide Page For your information WarrantyContent Flammable materials should not be stored near surface units Safety instructionsBefore using the first time Sensor sensivity reset Using the cook topCooking setting Your appliance at a glanceWhen pressing the minus-sen Switching off the cooking surfaceIf the cooking zone is yet not in use If you already use the cooking zoneSwitching the frying or dual-circuit zone on Cooking zone heating indicatorModel EKE 854.2 and KC 906.2 only Activating child proof lockWhat happens if Selecting pots and pansTime limit function Cleaning the cooking surface Cleaning and careRemove caking Care of the cooking surfaceAfter Sales Service KC 906.2 and EKE Users Guide USA Customer Care line 1 800 459
Top Page Image Contents