Frying or |
| Child proof lock |
As a rule, only the smaller cooking zone diameter is heated. However, when using frying pans and large saucepans, you may decide to switch on the outer cooking zone circuit.
Switching the frying or dual-circuit zone on:
– Press the cooking zone symbol next to the
–Pressing the cooking zone sym- bol once again deactivates the dual circuit cooking zone or fry- ing zone.
Operating the sensor lock detains unauthorised persons from using the appli- ance. In order to activate this lock the cooking area has to be in operation.
Activating child proof lock:
Press the sensor lock (2 seconds). The child proof lock can be activat- ed if the cooking area is in opera- tion. In this case you can only choose a lower cooking setting or switch off.
The lock is indicated by 3 flashing control indicators. .
Model EKE 854.2 and KC 906.2 only:
To heat a frying pan you can use the two small, closely adjacent cooking zones. The temperature must be controlled via the setting controls for both cooking zones. We recommend to set both cooking zones at the same cooking level.
Be careful: Switching off the cooking area does not deactivate the lock!
Deactivating the child proof lock:
at once,
after max. 3 Sek.
Cooking zone heating indicator
As long as the cooking zone is still hot, an “H” will appear in the display when the cooking zone has been switched off.
Press the sensors under the two left flasing control indicators at once. After not more than 3 seconds press the sensor under the flashing control indicator on the right.
Note: When the power supply has been interrupted the child proof lock is no longer active.
KC 906.2 and EKE Users Guide USA | 7 |