Notice:
Should you tune in a station which has alrea- dy been stored before, the corresponding preset button and the memory bank will briefly flash in the display if you have selected another memory bank.
Automatically storing the stron- gest stations with Travelstore
You can automatically store the six most powerful FM stations of your current recepti- on area sorted according to their signal strength. This function is particularly conve- nient on longer trips.
•Press the FMT button for more than 2 seconds.
The radio will search for the strongest FM stations and store them on the memory bank T (Travelstore). When this process has been completed, the radio will play the first station. If desired, stations can also be stored manu- ally on the Travelstore bank (see “Storing stations”).
Recalling stored stations
You can recall any stored station at the touch of a button.
•Select the waveband by pressing FMT or M•L. On FM, also choose the corre- sponding memory bank by pressing the FMT button as many times until the desired bank appears in the display.
•Press the corresponding preset button briefly to recall the station.
Scanning stored stations with Preset Scan
You can have all of the stored stations played briefly on all wavebands.
On FM, you can scan the stations of the Travelstore memory bank or of the two other storage levels.
•Select the waveband.
•On FM, choose Travelstore or another
memory bank using the FMT button.
To start Preset Scan:
•Press SC/MIX for approximately 2 se- conds.
The stations will be played for approximately 8 seconds each.
The positions blinking in the display show you the memory bank and preset position of the currently scanned station.
To select a station currently being scanned and switch off Preset Scan:
•Press SC/MIX briefly.
Scanning stations with
Radio-Scan
Beginning with the station currently tuned in, you can scan the waveband. The radio will play each station for 8 seconds.
To start the scan:
•Press SC/MIX briefly.
The scanned frequency or the station name will start flashing in the display.
During the actual scanning process “SCAN” will be displayed.
To select a station currently being scan- ned and switch off the scan function:
•Press SC/MIX briefly.
If no station is selected, the scan function will be automatically switched off after the fre- quency band has been run through comple- tely. The unit will tune in the station listened to before starting the scan.
28
