Perlick DP32, DS32 specifications Pouring a Perfect Glass of Beer Direct Draw Dispensers

Page 8

Pouring a Perfect Glass of Beer – Direct Draw Dispensers

➠	STEP 1

Start with a clean glass.
Place the glass at a
45° angle, one inch
below faucet. Do not
let the glass touch the
faucet. Open the faucet
all the way.
	STEP 2	➠
	After the glass has
	reached half full,
	gradually bring the
	glass to the upright
	position
➠	STEP 3

Let the remaining beer run straight down the middle of the glass. This ensures proper release of CO2 by producing a 3⁄4” to 1” foam head.

STEP 4 ➠

Close the faucet quickly and completely.

Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.

Form No. Z2280

8

Image 8

Contents Installation and Operation Instructions Service and cleaning To a condensate pan located in the compressor housingKeg Depth Ins. mmParts List Installing Casters or Legs OptionalInstalling the Faucet Dispensing Head Suggested Tools RequiredTapping a Single Valve Keg Sankey Connecting the Keg CouplerImportant Be sure to close this valve when untapping keg Connecting the Regulator to the CO2 Cylinder Adjusting the CO2 Gas FlowReplacing CO2 Gas Cylinder Proper CO2 HandlingTemperature Refrigeration and Temperature ControlAdjusting the temperature Colder TemperaturesCleaning the Cabinet Cleaning the CondenserBacteria YeastPouring a Perfect Glass of Beer Direct Draw Dispensers Trouble Shooting Direct Draw Dispensers Self-Contained Beer Service Problems Wild BeerFlat Beer Cloudy BeerReplacement Parts Direct Draw Dispensers Self-Contained For Single Valve Keg Coupler Series D MiscellaneousWiring Diagram Direct Draw Dispensers Self-Contained DS Series 2, 3 and 4 Keg Coolers