Perlick DP32, DS32 Keg, Depth Ins. mm, Ship WT lbs. kg, Bottom is 18 gauge galvanized steel

Installation and Operating Instructions

Sizes and Specifications, Direct Draw Dispensers - Self-Contained

DOOR FINISH						MODEL NUMBERS
BLACK			DS60B				DS72B		DS84B
STAINLESS STEEL			DS60S				DS72S		DS84S
						SPECIFICATIONS
KEG CAPACITY			2 Keg				3 Keg		4 Keg
NUMBER OF DOORS			2				2		3
CABINET	Length Ins. (mm)		60” (1524)				72” (1829)		84” (2134)
DIMENSIONS	Depth Ins. (mm)		243/4” (629)				243/4” (629)		243/4” (629)
	Height Ins. (mm)		341/2” (876)				341/2” (876)		341/2” (876)
NO. OF DISPENSING HEADS			1				1		2
NO. FAUCETS			2				2		2
CONDENSER UNIT H.P.			1/4				1/3		1/3
RUNNING LOAD - AMPS			5.9				7.5		7.5
SHIP WT lbs. (kg)			385 [175]				425 [193]		500 [227]
INTERIOR		Door sill: High strength polyethylene. Door pan and ceiling: High strength polystyrene.
		Floor pan: Satinless steel. Walls: Galvanized steel.
EXTERIOR		All Models: The top is 20 gauge stainless steel. The back, front and sides are stainless steel.
		Bottom is 18 gauge galvanized steel.
		Black Models: Doors and grilles are black vinyl coated steel.
		Stainless Models: Doors and grilles are stainless steel.
REFRIGERATION		R-134a capillary tube-type. Aluminum fin and copper tube evaporator, epoxy coated coil. Forced air
		into dispensing head. Adjustable temperature control. Self-defrosting. Pull-out condensing unit for
		service and cleaning.
VENTILATION		Front ventilated.
ELECTRICAL		115 Volt, 60 Hz., 1 Phase AC. Furnished with three prong, six foot NEMA5-15P cord.
		Contact Perlick for other voltage/frequency requirements.
PLUMBING		3/4” NPT drain exits out right end or 1” NPS out bottom. Evaporator condensate has been plumbed
		to a condensate pan located in the compressor housing.
INSULATION		Foamed-in-place polyurethane; 2” walls, 11/2” top and floor.
OPTIONAL ACCESSORIES		• Optional Dispensing Heads				• Leg Set	• Keg Couplers
		• Caster Sets				• Shelf Kit	• Faucet Locks
	84” [2134] 4 KEG
	72” [1829] 3 KEG								10 9/16”
	60” [1219] 2 KEG
	68” [1726] 4 KEG								[268]
	56” [1492] 3 KEG			4 1/4”			12 11/16”	3 1/8”
	44” [1118] 2 KEG
				[107]			[322]	[79]
		6 5/16” [161]			NOTE “B”
	KEG			18 3/4” [476]		24 3/4”	31 1/4”
	KEG		KEG	BACK LINER
						[629]	[794]
				TO INSIDE OF
							DOOR
				DOOR SILL
							HEIGHT 27 7/16”
							34 1/2”	[697]	1 1/8”
							[876]	DOOR
	23 1/2”		19 7/8”					OPENING	[29]
	[597]		[505]
			DOOR
			OPENING						NOTE “A”
			R23 1/2”			NOTE “A”: 3/4” NPT DRAIN EXIT			3 11/16”
									[94]
						NOTE “B”: 1” NPS DRAIN ACCESS
	Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
Form No. Z2280

2