Adding Rinse Aid to dispenser

U SING YOUR DISHWASHER

USING YOUR DISHWASHER

The purpose of rinse aids is to prevent possible spots on dishes formed from droplets during drying operation. By removing them, drying performance will be increased.

NOTE

Only liquid rinse aids can be used for this dishwasher.

�Filling Rinse Aid

1.Rotate the round cap counterclockwise and remove it.

2.Add a liquid rinse aid to the maximum level. (Max. 4.8 oz (145mL))

3.Replace and lock the cap.

4.Rinse aid will be automatically dispensed during the final rinse cycle.

�Rinse Aid Amount Setting

The factory setting is at level 3 which is where you can expect the best performance under a normal condition. After a cycle is done, if you notice some spots, streaks or water marks on the dishes, adjust to a higher setting. If you notice foam present on the bottom of the glasses or tub bottom, change to a lower setting.

1.Remove the cap.

2.Rotate adjuster to the desired setting.

�Refilling Rinse Aid

4.8oz (145mL) is the capacity of the rinse aid dispenser. The refilling period totally depends on your washing habits such as the number of washes per month and which rinse aid setting you adjust to your washing conditions. The indicator light will inform you when there is insufficient rinse aid in the dispenser. The indicator light will stay on when you close the door to start a cycle.

When the lamp is on, it indicates the rinse-aid reservoir is almost empty.

�Black indicates sufficient Rinse Aid �Clear indicates Rinse Aid required