Kuppersbusch USA EEB 9800.0 manual Regenerating the ökotherm catalyst

Page 22

Unscrewing/reinstalling the individual telescopic glide-out shelves (acc.-no. 601)

Unscrewing the individual telescopic glide-out shelves

If you want, you can screw the individual telescopic glide-out shelves off the side walls with a screwdriver so that it is easier to clean the walls.

– For this purpose unscrew the bottom holding screw on each side.

Reinstalling the individual telescopic glide-out shelves

– Insert the individual telescopic glide-out shelves at the back into the holes in the intermediate wall and screw the individual telescopic glide-out shelves at the bottom front to the side walls.

Regenerating the ökotherm® catalyst

The ökotherm catalyst scrubs the grease particles and odor arising when roasting in Hot air convection mode. The catalyst cleansing capability is usually adequate. In rare cases of very intensive roasting of very large amounts of food grease particles may settle on the catalyst. Next time you use hot air convection, e.g. for baking a pizza, the deposits will be disposed of over time.

Should you feel the catalyst cleansing effect has weakened (e.g. if there is a strong odour), the catalysts can be regenerated by removing the fatty deposits:

–Select the programe Hot air convection B.

–Then touch the Rapid Heating sensor J.

–Set the temperature to 555 °F / 290 °C and cooking duration u to 60 minutes.

–Touch the sensor key j.

What to do if trouble occurs...

=Use a qualified technician for repairs!

However, there are some problems that you can handle yourself. First, check and see if there have been any operating errors. Remember--repairs during the guarantee period are not free of charge if they are caused by operating errors or non-observance of the following instructions:

What is to be done if…

... neither sensors nor lighting function?

Please check: Is the mains plug in the wall socket? Is the domestic fusing OK? Power failure?

... one or more sensors don’t react to touch but the lighting can be turned on?

Possible cause: The sensors constantly adapt in sensitivity to ambient conditions. Unfavorable conditions such as e.g. if you lean against them for a lengthy period, may cause then not to react for several minutes.

Wait for about 15 minutes or pull the relevant fuse and then re-insert it. Repeat this procedure if necessary!

The keys have adapted and now react to touch again.

... one or more sensors don’t react to touch despite repeating this procedure?

Possible cause: Faulty sensor key or component.

If you’ve repeated the procedure and the keys still don’t react, pull the fuse again and then contact our Customer Service.

... if <demonstration mode> is displayed and the oven won’t heat?

Have this mode de-activated by Customer Service!

... the oven door glass cracked?

Switch the oven off and have the door replaced by Customer Service.

... the door sealing is damaged?

Replace the door sealing. (See page 23) Do not use the oven with a dama- ged sealing!

...the oven lighting is defective?

The oven can still be used. Replace the halogen bulbs as soon as possible - when the oven has cooled down - see “Replacing a halogen bulb”).

...there is a powerful odor?

Regenerate the ökotherm®-catalyst (see page 22).

... the oven generates a strong smell of vinegar?

Cooking a dish containing alcohol or yeast using programes with Hot air convection will produce a vinegar smell. If you find the smell disturbing, use

one of the modes without fan, such as Top/Bottom heat.

... fruit juice or albumin gets onto enameled surfaces?

This is a harmless enamel change that cannot be changed.

22

EEB 9800.0 USA

Page 21 Page 23
Image 22
Page 21 Page 23
Contents User’s guide Following symbols are used in this operating manual What Is CoveredWhat Isn’t Covered For your informationContents Setting the clock Safety instructionsInitial cleaning Your appliance at a glance Accessories suppliedAccessories available For the telescopic glide-out shelvesControl panel sensor keys and displays Oven trays General information on your ovenGeneral Information Turning the oven light on and offUsing your oven Additional functions Roasting Guideline values for roasting using the heating programes Overview of roasting programesRoasting thermometer and core temperature function Baking programe overview BakingSet baking programe Baking with heating programes Baking pizzaGuidelines for baking Defrosting and proving L Grilling PreservingGuidelines for grilling DefrostingDeactivating the child safety lock Child safety lock hActivating the child safety lock Overview of heating programesSetting optional functions Inserting the oven trays correctly Special accessoriesPushing in the trays Pulling out the traysCleaning and Care Removing and installing the side racks Removing and installing the oven doorFolding heating element down/up Regenerating the ökotherm catalyst Replacing a halogen bulb After Sales ServiceReplacing the door sealing Customer Care line 1 800 459

EEB 9800.0 specifications

The Kuppersbusch USA EEB 9800.0 is an exceptional built-in oven that exemplifies modern design and advanced culinary technology. Renowned for its quality and reliability, Kuppersbusch has created an appliance that not only elevates the aesthetic of any kitchen but also enhances cooking performance.

One of the standout features of the EEB 9800.0 is its versatile cooking modes. This oven offers a selection of cooking options, including conventional cooking, fan-assisted cooking, and grilling. This range ensures that users can achieve perfect results for a variety of dishes, from succulent roasts to delicate pastries.

The EEB 9800.0 utilizes advanced humidity control technology, which helps maintain moisture levels within the oven. This innovative feature is particularly beneficial when baking, as it ensures that bread and desserts come out perfectly risen and moist. The inclusion of a steam function allows for additional versatility in cooking, enabling users to experiment with techniques previously reserved for professional kitchens.

In terms of design, the Kuppersbusch EEB 9800.0 boasts a sleek, minimalist look that fits seamlessly into any modern kitchen. The exterior is crafted from high-quality stainless steel, ensuring both durability and easy maintenance. The oven also features a large, touch-sensitive control panel that simplifies operation. With intuitive controls and clearly displayed cooking modes, even novice cooks can navigate the appliance with ease.

Safety is paramount in appliance design, and the EEB 9800.0 does not disappoint. It includes features such as a residual heat indicator, which provides users with a clear visual cue when the oven is still hot, reducing the risk of burns. Additionally, the appliance is equipped with multiple safety measures that prevent overheating and ensure consistent performance over time.

Moreover, the Kuppersbusch EEB 9800.0 is designed with energy efficiency in mind. Its insulation technology minimizes heat loss, enabling faster cooking times while consuming less energy. This not only benefits the environment but also helps users save on energy costs.

Overall, the Kuppersbusch USA EEB 9800.0 is a perfect fusion of style and functionality. Its impressive range of features, advanced technologies, and user-friendly design make it an ideal choice for both amateur and professional chefs. The EEB 9800.0 is not just an oven; it is a culinary companion that inspires creativity in the kitchen while ensuring superior cooking results.
Top Page Image Contents