Prepare to Install the Range

Part 1 SAFETY

WARNING

• The information in this manual should be followed exactly.

-A fire or electrical shock may result causing property damage, personal injury or death.

WARNING

• DO NOT step or sit on oven door. Install the Anti-Tip Bracket supplied with the range.

- The range could be tipped and injury might result from spilled hot liquid, food, or the range itself.

-If the range is pulled away from the wall for cleaning, service, or any other reason, ensure that the Anti- Tip Device is properly reengaged when the range is pushed back against the wall.

TOOLS NEEDED

Safety Glasses

Tape Measure

Pencil

Gloves

PARTS PROVIDED

ENGLISH

CAUTION

• Put on gloves during installation procedure.

- Failure to do so can result in bodily injury.

NOTE

•Read all instructions contained in these installation instructions before installing range.

•Remove all packing materials from the oven compartments before connecting the electrical supply to the range.

•Observe all governing codes and ordinances.

•Be sure to leave these instructions with the consumer.

NOTE

Keep these instructions with your owner’s manual for future reference.

•As when using any appliance generating heat, there are certain safety precautions you should follow.

•Be sure your range is installed and grounded properly by a qualified installer or service technician.

•Make sure the wall coverings around the range can withstand the heat generated by the range.

•To eliminate the need to reach over the surface elements, cabinet storage space above the elements should be avoided.

Rear filler & 2 Screws

(LSE Series only)

(For Anti-Tip Bracket Mounted on Concrete Floors and Walls)

PARTS NOT PROVIDED