Roper D975 owner manual LIFT-UP Cooktop, Removable Oven Racks, Removable Oven Door, Stop Position

Page 21

LIFT-UP COOKTOP

The cooktop can be raised so the area underneath can be cleaned.

Raise the front of the cooktop until the support rods snap into position to hold the cooktop.

To lower cooktop, push in on the front of the supports while lowering top.

Porcelain enamel can chip. Handle porcelain enameled cooktops carefully.

REMOVABLE OVEN RACKS

Be careful not lo scratch the oven finish when installing or removing oven racks.

To install:

1.Set the raised back edge of the rack on a pair of rack guides.

2.Push the rack in until you reach the bump in the rack guide, then lift the front of the rack a btt and push the rack all the way in

To remove:

1.Pull the oven rack out, then up.

REMOVABLE OVEN DOOR

To remove:

1.Open the doorto the broil stop position (see illustration).

2.Grasp the doorat each side and lift up and off the hinges.

NOTE: When the door is removed and hinge arms are at stop position, do not bump or try to move the hinge arms. The hinges could snap back causing an injury to the hands ordamage to the porcelain on the front of the oven. Cover the hinges with toweling or empty towel rolls while working in the oven area.

To replace:

1. Hold the doorover the hingeswith the slots at the bottom edge of the door lined up with the hinges. The hinge arms must still be in the stop position.

2. Slide the door down onto the hinges as far as it will go

and close the door.

STOP POSITION

19

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Roper Thispage Contents Tool List Additional MaterialsLocation Electrical Requirements Prepare the CounterMake Electrical Connection Important Safety Warning Install RangeImportant Instructions For Your Safety Oven Fire Cooktop Grease FireEdif Your RangeFunction Buttons To SET the ClockCooktop Control Cooktop CookingTo USE the Timer Delayed Bake CycleIncomplete or Incorrect Settings Cancelling TonesBroiling Broiling TipsPositioning Broiler PAN Oven Cooking LAZY-DAY Coffee Cake Broccoli CasseroleSouthern Brunswick Stew TWO Corn Casserole Before a Clean Cycle Self-Clean CycleAfter a Clean Cycle Important Safety InformationWhen a Clean Cycle is Finished To SET SELF-CLEANTo Interrupt a Clean Cycle To SET Delay SELF-CLEAN CycleMaterials Cleaning TipsRemovable Cooktop Units Removable KnobsMolded Iclear Groove in Stem Element Reflector Bowls ReceptacleRemovable Oven Racks LIFT-UP CooktopRemovable Oven Door Stop PositionReplacing the Oven Light self-cleaning models Problem Before Calling for ServiceDON’T Call for Service Until YOU Check Possible CauseProblem Possible Intentionauyleftblank Roper

D975 specifications

The Roper D975 is a standout in the realm of heavy machinery, particularly designed for agricultural and industrial applications. Its robust construction and innovative features make it an ideal choice for professionals seeking reliability and efficiency in demanding environments.

One of the key features of the Roper D975 is its powerful engine, delivering exceptional horsepower and torque. This enables the machine to tackle a variety of tasks, from plowing fields to lifting heavy loads. The engine is not only powerful but also designed for fuel efficiency, allowing operators to work longer while reducing operational costs.

Another significant characteristic of the Roper D975 is its advanced hydraulic system. This system provides superior lift capabilities, essential for tasks that require precise movement of heavy materials or equipment. The hydraulic system is responsive and efficient, ensuring that operators can execute tasks smoothly without any lag.

The D975 is equipped with an intuitive operator interface, featuring ergonomic controls and displays that provide real-time feedback on the machine’s performance. This user-friendly design ensures that operators can navigate the machine effectively, maximizing productivity and reducing the chance of errors.

In terms of durability, the Roper D975 features a rugged frame constructed from high-quality materials, allowing it to withstand harsh working conditions. The machine also has a reinforced undercarriage and reinforced axles, contributing to its ability to handle rough terrains without compromising stability.

Safety is a top priority with the Roper D975, which includes numerous safety features such as rollover protection structures (ROPS) and safety alarms. These features ensure that operators can work confidently, knowing that their well-being is safeguarded.

Moreover, the D975 is compatible with a range of attachments, enhancing its versatility. This adaptability allows users to customize the machine for specific jobs, whether it involves grading land, excavating, or performing agricultural tasks.

In summary, the Roper D975 combines power, efficiency, and versatility in one reliable package. Its advanced technologies, durable construction, and focus on operator safety make it a valuable asset for anyone in need of a heavy-duty machine. Whether for agricultural purposes or industrial use, the Roper D975 stands out as a true workhorse in its category.
Top Page Image Contents