Roper D975 owner manual Removable Knobs, Removable Cooktop Units, Molded Iclear Groove in Stem

Page 20

REMOVABLE KNOBS

All control knobs may be removed for easy cleaning by pulling the knob straight off the stem. Be sure that the knob is in the OFF position before removal.

Hint: Slip a thin cloth (such as a handkerchief) or a piece of string under and around the knob edge and pull up.

Cautlon: Read these instructions carefully before replaclng the knobs. Replacing the knobs Improperly will damage the knobs and the spring clip on the Stems. If this happens, the knobs will flt loosely.

To replace the knob:

1.The knob stem has a groove in each side. The groove on one side has a spring clip. The other groove is clear (see illustration).

2.Check the inside of the knob and find the molded rib.

3.Replace the knob by fitting the molded rib inside the knob into the clear groove on the stem.

MOLDED

ICLEAR

GROOVE IN STEM

REMOVABLE COOKTOP UNITS

The cooktop elements can be unplugged and the bowls removed for cleaning.

Be sure all cooktop unlt control knobsare turned off and elementsarecoolbeforeyouremoveorreplaceacooktop

unit.

To remove:

1.Grasp element, tilt it upward slightly to clear the bowl, then pull away from the receptacle. The element will not sit level when replaced if it is forced too far upward when removed.

2.For models with porcelain enameled reflector bowls, remove the chrome trim ring. See the Self-Cleaning Section about.informationon cleaning porcelain enameled reflector bowls in self clean cycle.

3.Lift out the bowl.

Do not put the element into water. It cleans itself when heated during normal use.

To replace:

1.Replace the bowl. Be sure the receptacle is showing in the bowl opening.

2.For models with porcelain enameled reflector bowls, replace chrome trim ring.

3.Slide the plug of the element firmly into the receptacle and lower the element into place.

IMPORTANT: Never operate a cooktop element without the bowl In place. Thls can cause scorching of the cooktop, burning of wlrlng Insulation and lossof energy.

ELEMENT

REFLECTOR BOWLS RECEPTACLE

18

EMNT07

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Roper Thispage Contents Location Tool ListAdditional Materials Make Electrical Connection Electrical RequirementsPrepare the Counter Install Range Important Safety WarningImportant Instructions For Your Safety Cooktop Grease Fire Oven FireYour Range EdifTo SET the Clock Function ButtonsCooktop Cooking Cooktop ControlDelayed Bake Cycle To USE the TimerIncomplete or Incorrect Settings Cancelling TonesPositioning Broiler PAN BroilingBroiling Tips Oven Cooking Southern Brunswick Stew LAZY-DAY Coffee CakeBroccoli Casserole TWO Corn Casserole Self-Clean Cycle Before a Clean CycleAfter a Clean Cycle Important Safety InformationTo SET SELF-CLEAN When a Clean Cycle is FinishedTo Interrupt a Clean Cycle To SET Delay SELF-CLEAN CycleCleaning Tips MaterialsRemovable Knobs Removable Cooktop UnitsMolded Iclear Groove in Stem Element Reflector Bowls ReceptacleLIFT-UP Cooktop Removable Oven RacksRemovable Oven Door Stop PositionReplacing the Oven Light self-cleaning models Before Calling for Service ProblemDON’T Call for Service Until YOU Check Possible CauseProblem Possible Intentionauyleftblank Roper

D975 specifications

The Roper D975 is a standout in the realm of heavy machinery, particularly designed for agricultural and industrial applications. Its robust construction and innovative features make it an ideal choice for professionals seeking reliability and efficiency in demanding environments.

One of the key features of the Roper D975 is its powerful engine, delivering exceptional horsepower and torque. This enables the machine to tackle a variety of tasks, from plowing fields to lifting heavy loads. The engine is not only powerful but also designed for fuel efficiency, allowing operators to work longer while reducing operational costs.

Another significant characteristic of the Roper D975 is its advanced hydraulic system. This system provides superior lift capabilities, essential for tasks that require precise movement of heavy materials or equipment. The hydraulic system is responsive and efficient, ensuring that operators can execute tasks smoothly without any lag.

The D975 is equipped with an intuitive operator interface, featuring ergonomic controls and displays that provide real-time feedback on the machine’s performance. This user-friendly design ensures that operators can navigate the machine effectively, maximizing productivity and reducing the chance of errors.

In terms of durability, the Roper D975 features a rugged frame constructed from high-quality materials, allowing it to withstand harsh working conditions. The machine also has a reinforced undercarriage and reinforced axles, contributing to its ability to handle rough terrains without compromising stability.

Safety is a top priority with the Roper D975, which includes numerous safety features such as rollover protection structures (ROPS) and safety alarms. These features ensure that operators can work confidently, knowing that their well-being is safeguarded.

Moreover, the D975 is compatible with a range of attachments, enhancing its versatility. This adaptability allows users to customize the machine for specific jobs, whether it involves grading land, excavating, or performing agricultural tasks.

In summary, the Roper D975 combines power, efficiency, and versatility in one reliable package. Its advanced technologies, durable construction, and focus on operator safety make it a valuable asset for anyone in need of a heavy-duty machine. Whether for agricultural purposes or industrial use, the Roper D975 stands out as a true workhorse in its category.
Top Page Image Contents