Roper D975 owner manual Cooktop Grease Fire, Oven Fire

Page 8

IMPORTANT SAFETY INSTRUCTIONS

Keep this book for later use.

Be sure your range is installed and grounded properly.

Choose pots and pans with flat bottoms, large enough to cover the entire cooktop element. This will cut down the risk of setting pot holders or clothing on fire with an uncovered element and waste less energy.

Always use care when touching cooktop ele- ments, areas near cooktop elements, oven heat- ing elements or inside the oven. Heating ele- ments could be hot enough to burn you even if they are dark in color. The oven vent duct and oven door may also become hot during range use.

Only some kinds of glass or ceramic pans can be used for cooktop cooking. Be sure that the pan you use will not break when heated on the cooktop elements.

Always change oven rack positions while oven is cool.

After broiling, alwaystake the broiler pan out of the range and clean it. Leftover grease in the broiler pan can catch on fire next time you use the pan.

Always use dry pot holders when removing pans from the oven or cooktop. Moist or damp pot holders can cause steam burns.

Always use care when opening oven door. Let hot air and steam out before moving food.

Always follow cleaning instructions in this book.

Always remove the broiler pan and other utensils from the oven before a self-clean cycle.

Never try to repair or replace any part of the range unless instructions are given in this book. All other work should be done by a skilled technician.

Never heat unopened food containers. Pressure build up may make container burst and cause injury.

Never leave jars or cans of fat or drippings on or near the range. Never let grease build up on your range. You can keep grease fires from starting if you clean up grease and spills after each range use.

Never use aluminum foil to line drip bowls or oven bottoms. Improper use of foil could start a fire.

Never block free airflow through the oven vent.

Never try to move a pan of hot fat, especially a deep fat fryer. Wait until the fat has cooled.

Never put removable heating elements in water.

Never use the cooktop without reflector pans or drip bowls being in place. If these pans or bowls are not there during cooking, wiring or other range parts may be damaged.

Never rub, move or damage the door gasket on self-cleaning ranges. The gasket is essential for a good seal. Only clean the gasket by soaking it with hydrogen peroxide, as described in the self- clean section of the manual.

Never touch surface units, heating elements, or interior surfaces of the oven. They may be hot even though they appear dark in color.

Read and understand this information NOW!

Should you ever need it, you will not have time for reading.

Never use water on a grease fire - it will only spread the flames.

COOKTOP GREASE FIRE

Never pick up a flaming pan...lnstead:

1.Turn off the element.

2.Smother the fire with a tightly fitting pan lid, baking soda or an extinguisher.

OVEN FIRE

1.Close oven door and turn controls off.

2.If fire continues, throw baking soda on the

ESAFOZ-4

Image 8
Contents Roper Thispage Contents Location Tool ListAdditional Materials Make Electrical Connection Electrical RequirementsPrepare the Counter Install Range Important Safety WarningImportant Instructions For Your Safety Cooktop Grease Fire Oven FireYour Range EdifTo SET the Clock Function ButtonsCooktop Cooking Cooktop ControlDelayed Bake Cycle To USE the TimerIncomplete or Incorrect Settings Cancelling TonesPositioning Broiler PAN BroilingBroiling Tips Oven Cooking Southern Brunswick Stew LAZY-DAY Coffee CakeBroccoli Casserole TWO Corn Casserole Self-Clean Cycle Before a Clean CycleAfter a Clean Cycle Important Safety InformationTo SET SELF-CLEAN When a Clean Cycle is FinishedTo Interrupt a Clean Cycle To SET Delay SELF-CLEAN CycleCleaning Tips MaterialsRemovable Knobs Removable Cooktop UnitsMolded Iclear Groove in Stem Element Reflector Bowls ReceptacleLIFT-UP Cooktop Removable Oven RacksRemovable Oven Door Stop PositionReplacing the Oven Light self-cleaning models Before Calling for Service ProblemDON’T Call for Service Until YOU Check Possible CauseProblem Possible Intentionauyleftblank Roper

D975 specifications

The Roper D975 is a standout in the realm of heavy machinery, particularly designed for agricultural and industrial applications. Its robust construction and innovative features make it an ideal choice for professionals seeking reliability and efficiency in demanding environments.

One of the key features of the Roper D975 is its powerful engine, delivering exceptional horsepower and torque. This enables the machine to tackle a variety of tasks, from plowing fields to lifting heavy loads. The engine is not only powerful but also designed for fuel efficiency, allowing operators to work longer while reducing operational costs.

Another significant characteristic of the Roper D975 is its advanced hydraulic system. This system provides superior lift capabilities, essential for tasks that require precise movement of heavy materials or equipment. The hydraulic system is responsive and efficient, ensuring that operators can execute tasks smoothly without any lag.

The D975 is equipped with an intuitive operator interface, featuring ergonomic controls and displays that provide real-time feedback on the machine’s performance. This user-friendly design ensures that operators can navigate the machine effectively, maximizing productivity and reducing the chance of errors.

In terms of durability, the Roper D975 features a rugged frame constructed from high-quality materials, allowing it to withstand harsh working conditions. The machine also has a reinforced undercarriage and reinforced axles, contributing to its ability to handle rough terrains without compromising stability.

Safety is a top priority with the Roper D975, which includes numerous safety features such as rollover protection structures (ROPS) and safety alarms. These features ensure that operators can work confidently, knowing that their well-being is safeguarded.

Moreover, the D975 is compatible with a range of attachments, enhancing its versatility. This adaptability allows users to customize the machine for specific jobs, whether it involves grading land, excavating, or performing agricultural tasks.

In summary, the Roper D975 combines power, efficiency, and versatility in one reliable package. Its advanced technologies, durable construction, and focus on operator safety make it a valuable asset for anyone in need of a heavy-duty machine. Whether for agricultural purposes or industrial use, the Roper D975 stands out as a true workhorse in its category.