Using Your Refrigerator

SETTING THE CONTROLS

Temperature

•Your refrigerator has a control pad on the dispenser that lets you regulate the temperature in the freezer and refrigerator compartments.

•Initially set the REFRIGERATOR CONTROL at 37°F (3°C) and the FREEZER CONTROL at 0°F (–18°C). Leave it at this setting for 24 hours (one day) to stabilize. Then adjust the compartment temperature as desired.

•Every time you touch the freezer temperature adjust button, the temperature changes in a circulating order of “0”→“-1”→“-2”→“-3”→“-4”→“-5”→“-6”→“8”→“7”→“6”→“5” →“4”→“3”→“2”→“1”→“0”.

•Every time you touch the refrigerator temperature adjust button, the temperature changes in a circulating order of “37”→“36”→“35”→“34”→“32”→“47”→“45”→“44”→“43”→ “42”→“41”→“39”→“38”→“37”.

Ice Plus

•When you touch the “ICE PLUS” button, the graphic

[ ] will light up in the display and it continues for 24hours. It will automatically shut off after 24hours have passed.

Or you can stop this function manually by touching the button one more time.

•This function imcreases both icemaking and freezing capabilities.

Dispenser

• You can select water, crushed ice, or

cubed ice by touching button as you desire.

•There could be some dripping after

dispensing.

It is recommended to hold your cup for a couple of seconds after dispensing.

NOTE : The dispenser is desinged not to operate while either refrigerator door is left open.

Filter

•It displays in months the number of months left to exchange the filter from the moment power is connected to the refrigerator.

•If you have changed the filter after 6 months of use or want to reset the filter display, press and hold the Filter Reset Button 3 seconds or more and the filter display will be initialized with a buzzing sound.

NOTE : The average life of the filter is 6 months.

Auto Light

•The dispenser lamp is on or off automatically by brightness of the room discovered from the light senser.

Light / Light Sensor

•If the light is set “Auto” mode, dispenser light will automatically turn on and off according to the brightness of room detected by light sensor.

Alarm

•When the power is connected to the refrigerator, door

alarm is initially set OFF and door alarm display will

show . When you touch button, the display will

change to and door alram function is now activated.

•When either refrigerator or the freezer door is left open for more than 60 seconds, the alarm will ding to let you know the door is open.

•When you close the door, the door alarm will stop dinging.

•If you want to disable the door alarm function, touch

button then the door alarm display will switched to .

Lock

•When the power is initially connected to the refrigerator, Lock Function is Off.

•If you want to activate Lock Function to lock other

buttons, press and hold button for 3 seconds or

more. sign will be displayed and the Lock Function is now enabled.

•No buttons other than button will work even including dispenser button while Lock Function is enabled.

•To disable the Lock Function, press and hold button for 3 seconds or more.

•Temperature Mode Switch Function (°F <->°C)

: If you want to convert °F to °C or vice versa, press and

hold	button and	button simultaneously for 5
seconds or more.

ENSURING PROPER AIR CIRCULATION

Do not block air channels with any objects or food for air circulation to prevent food loss due to the lack of cooling air.