Advanced Setting > QoS
To Enable QoS make sure the Enable Tick Box on the top of the page is ticked.
Upstream bandwidth | Total bandwidth of outgoing traffic. |
|
|
Downstream | Total bandwidth of incoming traffic. |
bandwidth | You can specify 8 QoS rules to control data flows through the Router. |
| |
| Local IP: IP address of LAN host |
| Local Port: TCP or UDP port |
| Remote IP: IP address of WAN host |
| Remote Port: TCP or UDP port |
|
|
QoS Priority | The QoS Packet Filter classifies data packets to three kinds of data flows (High,Normal,Low). The |
| ratio of bandwidth division of each data flow is 6:3:1 |
|
|
Enable | Make sure you tick the Enable tick box so that the QoS Filter is active. |
|
|
Click Save to save or Undo to cancel.
YML894 Rev1 | N3G002W 3G Wireless Router User Guide |
www.netcomm.com.au | 49 |
