Step 5.
1.Connect the power adapter to the port on the back panel of your N3G002W 3G Wireless Router.
2.Then plug the other end of the power adapter into a wall outlet or power strip.
a.The 3G LED will turn ON to indicate that the unit is powered on.
b.Other LEDs will flash ON and OFF as the N3G002W 3G Wireless Router performs initialization and Internet connection processes. This will take a few minutes.
c.When complete, the following LEDs will illuminate green: 3G, LAN, and WiFi.
Note: Please refer to the user guide for explination of the use of the WAN Port
YML894 Rev1 | N3G002W 3G Wireless Router User Guide |
www.netcomm.com.au | 11 |
