NetComm N3G002W manual YML894 Rev1

5.To use WEP, please configure the following:

•Change Security to WEP

•Change WEP Encryption to 64bit or 128bit (This example uses 64bit)

Notes: 64 bit needs 10 digits key and 128 bit needs 26 digits key.

•Type in the key in Key 1 field (This example uses “a1b2c3d4e5” key)

Notes: WEP key can only use numbers from 0 to 9 and letters from A to F.

•Click on Save to save the settings

6.To use WPA, please configure the following:

•Change Security to WPA-PSK

•Change Encryption Type to TKIP

•Enter the WPA key in the Passphrase field.

Notes: The key needs to be more then 8 characters and less then 63 characters and it can be any combination of letters and numbers.

•Click Save to save the settings

Notes: Wireless client network cards must be WPA-compliant to connect to a WPA enable network, if in doubt check the wireless client network card documentation, or use WEP security.

Notes: After changing the security settings, you might need to remove the current wireless settings on the computer and reconfigure the wireless computer according to the new settings.

YML894 Rev1	N3G002W 3G Wireless Router User Guide
www.netcomm.com.au	9