HP dc7608 manual Post Error Messages, Screen Message Probable Cause Recommended Action

C

POST Error Messages

POST Error Messages

An error message results if the Power-On Self-Test (POST) encounters a problem. This test runs when the system is turned on, checking assemblies within the computer and reporting any errors found.

Not all computers use all of the codes listed.

POST Error Messages

Screen Message	Probable Cause	Recommended Action
101-Option ROM	System ROM or	Verify the correct ROM.
Checksum Error	expansion board option	Flash the ROM if needed.
	ROM checksum.	If an expansion card was recently
		added, remove it and see if the problem
		remains.
		Clear CMOS.
		If the message disappears, there may be
		a problem with the expansion card.
		Replace the system board.
103-System Board	DMA or timers.	Clear CMOS.
Failure		Remove expansion boards.
		Replace the system board.
110-Out of Memory	Recently added PCI	If a PCI expansion card was recently
Space for Option	expansion card contains	added, remove it to see if the problem
ROMs	an option ROM too large	remains.
	to download during	In Computer Setup, disable the NIC PXE
	POST.	Option ROM Download to prevent PXE
		option ROM for the internal NIC from
		being downloaded during POST to free
		more memory for an expansion card’s
		option ROM. Internal PXE option ROM is
		used for booting from the NIC to a PXE
		server.
		Ensure that the ACPI/USB Buffers @ Top
		of Memory setting in Computer Setup is
		enabled.

Service Reference Guide, dc7600 390742-002 C–1