Removal and Replacement Procedures - Convertible Minitower (CMT) Chassis

7.In the minitower mode, pull up on the green drivelock mechanism 1 for that specific drive and slide the drive from the drive bay 2.

8.Remove the four guide screws (two on each side) from the old drive and install them in the lower set of holes on the optical drive.

Extra guide screws are provided on the chassis on the side of the fourth drive bay. Optical drives use M3 metric screws. The HP-supplied metric screws are black. The HP-supplied standard screws, used only for hard drives, are silver.

Service Reference Guide, dc7600

390742-002

6–23

Page 97
Image 97
HP dc7608 manual Service Reference Guide, dc7600 390742-002