Removal and Replacement Procedures - Convertible Minitower (CMT) Chassis

6.3Hood Sensor

1.Prepare the computer for disassembly (Section 6.1).

2.Remove the access panel (Section 6.5).

3.Disconnect the hood sensor cable from the system board.

4.Slide the hood sensor switch towards the front of the computer 1 and lower it down through the slot 2.

To install the hood sensor, reverse the removal procedure.

Service Reference Guide, dc7600

390742-002

6–3

Page 77
Image 77
HP dc7608 manual Hood Sensor