HP dc7608 manual Controller some models, Scsi controllers some models

		Setup Utilities and Diagnostics Features
Heading	Option	Description
Security	Embedded	Allows you to:
(continued)	Security	• Enable/disable the Embedded Security device.
		• Reset the device to Factory Settings.
		• Enable/disable power-on authentication support.
		• Reset authentication credentials.
		This feature is supported on some models only.
	Device Security	Enables/disables serial ports, parallel port, front USB ports, system
		audio, internal speaker (does not affect external speakers) network
		controllers (some models), MultiBay devices (some models), SMBus
		controller (some models), SCSI controllers (some models), and
		embedded security device.
	Network Service	Enables/disables the computer’s ability to boot from an operating
	Boot	system installed on a network server. (Feature available on NIC
		models only; the network controller must reside on the PCI bus or be
		embedded on the system board.)
	System IDs	Allows you to set:
		• Asset tag (18-byte identifier) and ownership Tag (80-byte
		identifier displayed during POST).
		• Chassis serial number or Universal Unique Identifier (UUID)
		number. The UUID can only be updated if the current chassis
		serial number is invalid. (These ID numbers are normally set in
		the factory and are used to uniquely identify the system.)
		• Keyboard locale setting (for example, English or German) for
		System ID entry.
	DriveLock Security	Allows you to assign or modify a master or user password for drives
		that support ATA Security. When this feature is enabled, the user is
		prompted to provide one of the DriveLock passwords during POST.
		If neither is successfully entered, the hard drive will remain
		inaccessible until one of the passwords is successfully provided
		during a subsequent cold-boot sequence.
		✎ This selection will only appear when at least one drive that
		supports ATA Security is attached to the system.
	OS Security	• Data Execution Prevention (some models) (enable/disable).
		Helps prevent OS security breaches.
		✎ This selection is in effect only if the processor and operating
		system being used comprehend and utilize this feature.
		• Intel Virtualization Technology (some models) (enable/disable).
		Changing this setting requires turning the computer off and then
		back on.

✎This selection is in effect only if the processor and operating system being used comprehend and utilize this feature.

✎Support for specific Computer Setup options may vary depending on the hardware configuration.

Service Reference Guide, dc7600 390742-002 2–9