Removal and Replacement Procedures - Ultra-Slim Desktop (USDT) Chassis

8.4MultiBay Device

ÄCAUTION: The MultiBay device must be removed from the chassis before the front panel assembly is removed. Failure to remove the MultiBay device will result in severe damage to the computer.

1.Prepare the computer for disassembly (Section 8.1).

2.Remove the access panel (Section 8.3).

3.Unlock the MultiBay device by rotating the green locking lever on top of the MultiBay drive cage to the unlocked position.

4.Replace the access panel.

5.Eject the MultiBay device by sliding the front-mounted eject lever to the left 1, then pull the device out of the device bay 2.

To install the MultiBay device, reverse the removal procedures. Lock the device in place if desired.

Service Reference Guide, dc7600

390742-002

8–5

Page 175
Image 175
HP dc7608 manual MultiBay Device