Speco TechnologiesIP Camera User’s Manual
connect to THE CAMERA by Domain Name (Server Name) allocated to THE CAMERA.
For example, run Web Browser and input Domain Name allocated to THE CAMERA in URL. In http://IPXXXXX.ipcam4u.net, ‘IPXXXXX’ is to be Name of Server registered in Service Server by user.
If the initial page is shown as
Fig. 3―8 Initial Page of THE CAMERA
3.3.Installation with IP Sharing Device (Router)
1) | After checking Video in ‘2. Install and Video Check’, then go to the next step. |
2)Connect THE CAMERA and PC with LAN Cable (Crossover Cable).
3)Cable Connection and Network Setting should be done same as per ‘2. Install and Video Check’.
4)Go to Network Setting Page of Administrator’s Page as per 4), 5), 6), 7) of ‘Static IP Setup’.
5)Click ‘Static IP Address’ in ‘IP Setting’ of
6)For setting of ‘DNS Server’, input DNS Address to fit with Network Environment to set.
Use DNS value normally set in PC.
25
