Speco Technologies | IP Camera User’s Manual |
*Before activating Alarm, user must set ALARM ENABLE at DOME SET – ALARM – ENABLE (Refer to page 15)
I.SECTOR SET
Up to 8 programmable sectors are available with 16 characters.
This feature is useful to memory the certain location such as parking zone or so on. When camera goes through this area, it shows the letter you memorized.
| SECTOR SET |
|
| Start Position | ||
|
|
|
|
|
| |
|
|
|
|
| ||
SECTOR NO |
| : 01 |
|
|
| |
SECTOR ID | : SECTOR01□□□□□□□□ |
|
| |||
SECTOR START: XXX.X.XX.X |
|
| ||||
SECTOR END | : XXX.X.XX.X |
|
| |||
|
| |||||
SAVE |
|
| End Position | |||
|
|
|
|
| ||
EXIT
DEFAULT SETTING
I-1. SECTOR SET – SECTOR NO.
Up to 8 programmable sectors set by the five keys are available.
I-2. SECTOR SET – SECTOR ID
set SECTOR ID, select up to 16 characters by using five keys to the left or right. Press ZOOM TELE button to move to the next character from the left to the right direction and ZOOM WIDE button to move to the next character from the right to left direction (Space displays when appears)
I-3. SECTOR SET – SECTOR START
To set SECTOR START angle, press FOCUS FAR button then move five keys to the left or right direction to set the position. To press FOCUS FAR button again is to escape.
95
