Speco Technologies & IP-WDRB1, IP-INTT5

IP Camera User’s Manual Speco Technologies

1) Setting up the LENS

Select the lens pressing the RIGHT button.

① On the SETUP menu screen, move the arrow indicator to the lens

using the UP or DOWN button.

② Select the desired feature using the LEFT or RIGHT button.

Contents

Main IP Camera Users Manual Page Important Notes Page Page Page 1. Feature 1. Feature 1.1. Package Page Page 1.2.2. Camera Feature I. Intensifier Cameras (Not available with IP-T5) II. Speed Dome Camera III. WDR Camera 2. Install and Check Video 2. Install and Check Video 2.1. Installation 2.2. Video Check Page (1) Page 3. Basic Setting 3. Basic Setting 3.1. Check Network and Installation Type Please refer to Chapter 6 in case knowledge of Network Environment is required. 3.2. Installation without IP sharing device (Router) 3.2.1. Static IP Setup Page Page 3.2.2. Dynamic IP Setup connection of Cable Modem supporting Dynamic IP with the camera. Dynamic IP Setting, to go to Ini tial Value and try again. Page 3.3. Installation with IP Sharing Device (Router) Page Page Page 3.4. Cautions 4. Expert Setting 4. Expert Setting Page 4.1. General Setting 4.1.1. Title Setting 4.1.2. Administrators ID and Password Change 4.1.3. User Registration 4.1.4. User List and Delete 4.1.5. Skip Login (Automatic Monitoring) 4.1.6. Time Zone Setting 4.1.7. Set Download Route of Plug-in Type ActiveX 4.1.8. Select Language 4.2. Network Setting 4.3. Video Setting 4.3.1. Video Setting 4.4. Color Setting 4.5. Alarm Setting 4.5.1. Alarm Event Setting Page 4.5.2. Alarm Event Test 4.6. DIO Setting (support for IP-INTT5/T5, IP-SD10X) 4.7. Motion Area Setup 4.8. Camera Setting(support for IP-SD10X) 4.9. Homepage Update 4.10. Firmware Update 4.10.1. Remote Upgrade Page 4.10.2. System Re-booting 4.11. Factory Reset 4.11.1. Reset Button 4.11.2. In reset of Factory default 5. Basic Use 5. Basic Use 5.1. Use of Web Viewer Page Page 5.2. Use of OSD (Not available with IP-T5) 5.2.1. Function 2) Speed Dome Camera (IP-SD10X) 3) WDR Camera (IP-WDRB1) 5.2.2. OSD Menu Setting 5.2.3. Operating Camera OSD Menu (Intensifier Cameras) Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page 5.2.4. Operating WDR Camera OSD Menu (IP-WDRB1) OSD MENU CONTROL OSD MENU ENTER / EXIT MAIN MENU Page Page Page Page Page Page Page B. CAMERA SET <TS-PTZ10X> < TS-PTZ3X > Indoor up to 3,200K Outdoor up to 5,800K ATW Mode - 2,000K to 10, 000K C. PRESET SET D. AUTO SCAN SET Page E. TOUR SET F. PRIVACY SET ADJUST: You can change the masking size by using five keys to the left or right MOVE: You can move the masking area by using five keys to the left or right G. PATTERN SET Page H. ALARM SET Page J. EXIT 5.2.7. ID SETTING(1-ON, 0-OFF)(110) Baud ID Set Proto 5.2.9. BAUD RATE SETTING 5.3. Use of IP Setting Utility Page 5.4. Use of Service Server 5.4.1. User Registration Page Page 5.4.3. List of Camera Page 5.4.4. Change of Users Information 5.4.5. Search Camera 5.5. See and Control of Still Image in Mobile or PDA 5.5.1. WAP2.0 (HTML) Page Page 5.5.2. PDA(WinCE) 5.6. Use of NVR Program 5.6.1. Required Specification of PC and OS 5.6.2. Supported O/S 5.6.3. Refer the NVR Users Manual in the CD-ROM. 6. Network Environment 6. Network Environment 6-1. Private line Environment Page 7. Appendix 118 IP Camera Users Manual Speco Technologies 7. Appendix Appendix A Basic Setting Table 119 120 IP Camera Users Manual Speco Technologies B-2 IP-INTD3 / INTD4 121 IP Camera Users Manual Speco Technologies B-3 IP-INTT5 122 IP Camera Users Manual Speco Technologies B-4 IP-T5 123 IP Camera Users Manual Speco Technologies B-5 IP-WDRB1 124 IP Camera Users Manual Speco Technologies B-6 IP-SD10X Page In case Camera uses S tatic/Public IP: input Ping IP address to command window In case camera uses dynamic/public IP: In this case, user cannot find camera IP In case camera uses private IP through IP sharing device: Ping-test private IP