Speco Technologies | IP Camera User’s Manual |
|
|
2.Install and Check Video
2.1.Installation
1)Connect the IP Camera to the PC by LAN cable (Crossover Cable)
2)Supply power to the camera using a 12 volt DC regulated power supply.
3)Wait approximately 2 minutes until the Link/LED light comes on.
2.2.Video Check
Basic network setting value of the camera is to be:
IP Address: 192.168.1.7
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
To connect THE CAMERA into the user’s PC, change the setting value of the PC network environment.
Fig. 2―1 Network Setting of User PC
14
