Speco Technologies IP-INTT5 user manual Preset PAN XXX.X Tilt, Focus FAR, Preset Save, Preset Exit

Speco Technologies				IP Camera User’s Manual
C-3.	PRESET – PAN: XXX.X TILT: XX.X
	Press	FOCUS FAR	button in order to set preset position then, use the five keys to the
	position where memorized preset no. is needed. Then press				FOCUS FAR	button again
	after setting a preset location.
C-4.	PRESET – SAVE
	Move five keys to the right direction when the cursor is at SAVE and then the cursor will
	be located on Preset ID for the continuous preset No. setting.
C-5.	PRESET – EXIT
	To escape this page, move five keys to the right direction.

D. AUTO SCAN SET

AUTO SCAN SET

START ANGLE	:
XXX.X.XX.X
END ANGLE	:
XXX.X.XX.X	DEFAULT SETTING
DIRECTION	: CW
ENDLES	: OFF
SPEED	: 10°/S
DWELL TIME	: 03
SAVE AND EXIT

D-1. AUTO SCAN- START ANGLE

To set start angle, press FOCUS FAR button then move five keys to the starting angle which is needed memorized. To press FOCUS FAR button again is to escape.

D-2. AUTO SCAN- END ANGLE

To set end angle, press FOCUS FAR button then move five keys to the starting angle which is needed memorized. To press FOCUS FAR button again is to escape.

D-3. AUTO SCAN – DIRECTION

Auto Scan directions are available with two direction as CW or CCW by five keys to the 88