Speco TechnologiesIP Camera User’s Manual
knowing IP address of THE CAMERA. Domain Name must be unique. Register after checking if it is duplicate or not.
③is to check whether the Camera is to be open or not. ④ is for the function to connect to THE CAMERA easily by User’s ID and Password registered in THE CAMERA, to monitor or control Video of THE CAMERA on Mobile Phone. (Mobile Phone Users should tick “Enable” and input connection ID and Password.)
‘EMAIL SERVICE’ is the function to send the set message to
Fig. 5―13 Camera Registration
‘SMS SERVICE’ is the function to send the set message (SMS) from Service Server to Mobile Phone number set by user upon alarm on THE CAMERA, in case setting to use Alarm Server as ‘ENABLE’. (refer to ‘Alarm Setting’ of ‘4. Expert Setting’). It’s available to input up to 5 Mobile Phone to get SMS Message and input up to 5 messages upon checking on ‘ENABLE’.
Cautions : Input Mobile Phone Number without
Click ‘Camera Registration’ to save the registered information after input of all information.
5.4.3.List of Camera
Input the registered User ID and Password to connect to Service Server on
105