Speco Technologies IP-INTT5, & IP-WDRB1 user manual Lens

Speco Technologies IP Camera User’s Manual

-ON :The ID name will displayed in the monitor.

-OFF : The name will not displayed in the monitor.

•CAMERA ID : Enter up to 8 characteristic.

•ID POSITION : Select the screen position of the camera ID.

C. LENS

•DC : Use When using DC lens.

•MANUAL : Use When using Manual lens.

D. WDR

•WDR (Wide Dynamic Range) : You can adjust the desired WDR BIAS from -20 to 20 and WDR RANGE from 0 to 36

E. WB CONTROL

•ATW (Auto Tracking White Balance) : The camera automatically control the white balance in any environment.

•AWB (Auto White Balance) : The white balance is automatically adjusted in a specific environment.

•MANUAL : Users can adjust the colors by adding or reducing the WB level.

You can adjust the desired WB level from 2K to 11K

F. LOW LIGHT

• SLOW SHUTTER : Control Image brightness by adjusting shutter speed

You can adjust the desired shutter speed from off to X32

-AGC : ON (You can adjust the desired AGC level from 0 to 60dB) or OFF (Deactivate automatic gain control feature)

•AUTO D/N : AUTO DAY/NIGHT

G. SPECIAL

•VIDEO : NTSC or PAL SELECTION

•FLIP : HORIZONTAL REVERSE (OFF or ON)

•SYNC

-INTERNAL : Internal synchronization

-INTERNAL2 : Internal synchronization (Color Rolling Mode)

-LINE LOCK : Phase adjustment may be necessary in multiple camera installations to prevent picture roll

when switching between cameras

•BACK LIGHT : BACK LIGHT ADJUST or SELECT AREA

•RESOLUTION : Select Resolution of CCD or PIXIM

•COLOR MODE : COLOR or B/W SELECTION

78