Speco TechnologiesIP Camera User’s Manual
| OSD DISPLAY |
|
| |
CAMERA ID | : OFF |
| ||
PRESET ID | : OFF | DEFAULT SETTING | ||
SECTOR ID | : OFF | |||
| ||||
COORDINATE | : ON |
| ||
[PREVIOUS PAGE] |
|
|
A-8-4. DOME SET – [NEXT PAGE] – [SYSTEM STATUS]
This page shows the information of this camera.
| SYSTEM STATUS |
|
| |
PROTOCOL : PELCO D, P |
| |||
BAUD RATE | : 2400 | BPS | ||
FIRMWARE VER. | : 2.00 | DEFAULT SETTING | ||
| ||||
UPGRADED DATE | : 06.07,22 | |||
CAMERA MODULE | : SDM100 | |||
[PREVIOUS PAGE] |
|
|
|
-Protocol and baud rate are shown according to the dip switch setting (Refer to page 29, 30 and 31)
-Firmware version and upgraded date will be changed if upgraded.
-Below camera modules can be set as follows.
SDM100 : SAMSUNG 10X ZOOM CAMERA MODULE.
EN300 : OPTICAL 3X MODULE (PAN FOCUS) : Board Camera ( with Fixed Lens)
A-8-5. DOME SET – [NEXT PAGE] – [INITIALIZATION]
To clear all memorized data for tour, preset, sector, privacy or pattern, move five keys to the right direction when the cursor is on [INITIALIZATION]
83