Protocol | Speco Technologies IP-INTT5, & IP-WDRB1 specs

Speco Technologies						IP Camera User’s Manual


	100010XXXX		17	111001XXXX	39	101111XXXX	61

	010010XXXX		18	000101XXXX	40	011111XXXX	62

	110010XXXX		19	100101XXXX	41	111111XXXX	63

	001010XXXX		20	010101XXXX	42

	101010XXXX		21	110101XXXX	43

	011010XXXX		22	001101XXXX	44

5.2.8.PROTOCOL

7th~8th dip switches are used for Protocol Setting. Factory Default: Pelco-D or Pelco-P ( Auto detection)

DIP SW1- 7	DIP SW1- 8

OFF	OFF	Pelco-D or Pelco-P

5.2.9.BAUD RATE SETTING

The 9th Dip Switch is used for BAUD RATE setting.

DIP SW can be changeable to 2400bps, 9600bps.

Factory Default: 2400bps.

DIP SW1 9th	BAUD RATE

OFF	2400

ON	9600

98

Image 98

Speco Technologies IP-INTT5, & IP-WDRB1 user manual Protocol

Contents

IP Camera User’s Manual Introduction Important Notes Contents Basic USE 115 118 Feature Feature Package Dimension and Camera Features Dimensions ① ③ Camera Feature Intensifier Cameras Not available with IP-T5 III. WDR Camera Install and Check Video Installation Video Check ―2 Web Browser Input ―4 User login User ID, Password, Rights User Password ―5 ActiveX Download Basic Setting Installation with IP sharing device Check Network and Installation TypeInstallation without IP sharing device Static IP Setup ―1 Main Page of the Camera Network Camera ―3 Administrator’s ―4 Network Setting Pic 3―5 IP Change Dynamic IP Setup Check ―7 Network Setting Installation with IP Sharing Device Router ―8 Initial Page of the Camera ―9 Network Setting ―10 IP Change ―13 Main Page of the Camera Page Expert Setting Expert Setting ―2 Administrator’s General Setting Title Setting Administrator’s ID and Password Change User Registration Skip Login Automatic Monitoring User List and Delete Time Zone Setting Set Download Route of Plug-in Type ActiveX Network Setting Select Language Video Setting Video Setting Alarm Event Setting Color SettingAlarm Setting ―18 Alarm Setting DIO Setting support for IP-INTT5/T5, IP-SD10X Alarm Event Test Motion Area Setup Camera Settingsupport for IP-SD10X 20 Camera Setting Homepage Update Firmware Update Remote Upgrade ―22 Firmware Update ―24 Firmware Download System Re-booting ―27 Upgrade Server Connection Error Reset of Factory default Factory ResetReset Button Basic Use Basic Use Use of Web Viewer Alarm Sound Flickering on Screen Same function as Definition of Web Viewer Key Board Use of OSD Not available with IP-T5 Function Speed Dome Camera IP-SD10X Speco Technologies WDR Camera IP-WDRB1 OSD Menu Setting F T Downsetup Select the desired feature using the UP or Down button Operating Camera OSD Menu Intensifier Cameras Speco Technologies IP Camera User’s Manual Brightness Speco Technologies IP Camera User’s Manual Speco Technologies IP Camera User’s Manual Speco Technologies IP Camera User’s Manual OFF LOW Middle High OFF on White Balance White BAL Page Speco Technologies IP Camera User’s Manual Intensifier Next Speco Technologies IP Camera User’s Manual Color Sync Privacy Reverse Detail Default OSD Menu Enter / Exit Operating WDR Camera OSD Menu IP-WDRB1OSD Menu Control Main Menu Lens Operating Camera OSD Menu IP-SD10X Exit Menu Dome SET Camera ID Default SettingDome SET Recover Dome SET Manual Speed Dome SET Zoom Speed Dome SET AlarmDome SET Next page Password Dome SET Language Confirmed Cancelled Dome SET Next page OSD Display Dome SET Next page Initialization Dome SET Next page System StatusSDM100 Samsung 10X Zoom Camera Module Tour Clear Are YOU SURE? YES no Camera SET Flickerless Dome SET Next page Save and ExitDome SET Next page Exit Camera SET Mirror Camera SET Aperture Camera SET WB ModeCamera SET D/N Mode Camera SET D Zoom Preset Preset ID Camera SET DSS Mode Digital Slow ShutterPreset Preset no Camera SET Exit Preset Exit Preset PAN XXX.X TiltPreset Save Focus FAR Auto Scan Dwell Time Auto Scan EndlessAuto Scan Speed Auto Scan Save and Exit Tour SET Tour Title Tour SET Preset noTour SET Tour no Tour SET Tour Step Tour SET Save Privacy SET ACTIONMOVE/ADJUSTTour SET Speed Tour SET Exit Pattern SET Patt no Privacy SET SavePrivacy SET Exit Zoom Wide Pattern SET Patt TitleZoom Tele Pattern SET Data Fill Alaram SET Alarm ACT Alaram SET Alarm noAlaram SET Alarm Input Alaram SET Save Sector SET Sector Start Sector SET Sector noSector SET Sector ID Sector SET Exit Sector SET Sector ENDSector SET Save DIP SW Setting ID SETTING1-ON, 0-OFF110 Protocol Use of IP Setting Utility ―2 IP Find ―4 IP Check Use of Service Server ―6 Service Server ―7 User Login ―9 User Registration ―11 Service Server Log-in Succeeded Camera Registration List of Camera ―13 Camera Registration ―14 Camera List ―16 Alarm Log List Change of User’s Information Search Camera ―17 Change User’s Information See and Control of Still Image in Mobile or PDA WAP2.0 Html ―21 Input User ID ―24 Pan/Tilt/Zoom Control PDAWinCE ―25 PDA Log-in Supported O/S Required Specification of PC and OSUse of NVR Program Refer the NVR User’s Manual in the CD-ROM Network Environment Network Environment Page Appendix Appendix a Basic Setting Table Appendix Appendix B Specification of Products IP-INTB1 / INTB2 IP-INTD3 / INTD4 IP-INTT5 122 IP-WDRB1 124 Appendix C To solve problem