Speco Technologies | IP Camera User’s Manual |
To set the blocking area, press FOCUS FAR button when the MOVE MODE is appeared. Then use the five keys to the user defined area in order to set blocking area. Then press FOCUS FAR button again to escape from MOVE MODE.
To adjust size of blocking area, move five keys to the right or left direction when the cursor is on ACTION. After move mode changed to ADJUST MODE, press FOCUS FAR button in order to adjust the size of blocking area. The size of blocking area can be adjustable by using five keys up down or left right,. After adjusting size of blocking area, press FOCUS FAR button to escape ADJUST mode.
ADJUST: You can change the masking size by using five keys to the left or right direction
MOVE: You can move the masking area by using five keys to the left or right direction (Default)
F-4. PRIVACY SET – SAVE
After setting the privacy masking zone, to save the data, move five keys to the right direction when the cursor is on SAVE. After saving the data, the cursor moves to PRIVACY NO.2 automatically to prepare the next privacy masking zone.
F-5. PRIVACY SET – EXIT
To escape this page, move five keys to the right direction
G. PATTERN SET
8 programmable patterns are available with 16 characters of title.
|
| PATTERN SET |
|
|
|
|
|
| |
PATT NO |
| : 01 |
|
|
PATT TITLE: PATTERN01□□□□□□□ |
| |||
DATA FILL : 100% | DEFAULT SETTING | |||
SAVE |
|
|
| |
EXIT |
|
|
| |
G-1. PATTERN SET – PATT NO.
92
