Speco Technologies | IP Camera User’s Manual |
5.2.1.OSD MAIN MENU TABLE (PAGE 54) The default setting is BLANK.
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM ***
Press any number from 001~255 with preset button on password blank and again it on confirm blank. Then “CONFIRMED” is displayed on the monitor and the menu will go back to the previous page automatically.
| ENTER PASSWORD |
|
|
| ENTER PASSWORD |
|
| ||
BY ENTERING PRESET CODE | BY ENTERING PRESET CODE | ||||||||
PASSWORD *** | PASSWORD *** | ||||||||
|
|
|
|
|
| ||||
CONFIRM *** | CONFIRMED |
| CONFIRM *** | CANCELLED |
| ||||
<CONFIRMED> |
| <CANCELLED> | |||||||
If user presses wrong preset number between PASSWORD and CONFIRM, “CANCELLED” is displayed on the monitor and if user failed 3 times, the menu will return to the previous page automatically * After setting a Password, an operator must press memorized password in order to enter OSD MAIN MENU, or to change the data which is memorized originally.
*An operator must remember the password for the operation. Manufacturer doesn’t provide a memorized password.
A-8-3. DOME SET – [NEXT PAGE] – [OSD DISPLAY]
OSD ID displayed after set ON in here and it can be hiding if selected OFF. Move five keys to the right or left direction in order to select OFF/ON when the cursor is located each item.
82
