Speco Technologies | IP Camera User’s Manual |
|
|
③Press SET button to access the SETUP mode.
④You can enter up to 15 characters.
a. Move the cursor to
b. Select the desired character by using the UP or DOWN button. c. Press SET button to confirm the blinking character. The first character is saved and the cursor in the bottom of the screen moves to the next position.
d. Repeat steps a, b and c until you create the full name you want. e. Select the position at which the CAMERA TITLE will b located on the screen.
Notes
If the CAMERA TITLE feature is set to ‘OFF’, the name will not displayed in the monitor.
After erasing the character from right to left, correct the character again.
70
