Speco Technologies & IP-WDRB1 Pattern SET Patt Title, Zoom Tele, Zoom Wide, Pattern SET Data Fill

Speco Technologies										IP Camera User’s Manual
	Up to 8 programmable user-defined patterns set by the five keys on the Webviewer
	GUI are available.
G-2.	PATTERN SET – PATT TITLE
	To set PATTERN TITLE, select up to 16 characters using Five keys to the left or right.
	Press	ZOOM TELE			button moves to the next character from the left to the right
	direction and		ZOOM WIDE			button moves to the next character from the right to left
	direction (Space displays when ￿ appears)								Pattern title is not displayed on the monitor,
	but only for the reference of user.
G-3.	PATTERN SET – DATA FILL
	To fill the programming data, press							FOCUS FAR		button in order to start the data fill up.
	Filling data is programmed according to the the five keys on the Webviewer GUI
	movement. Press			FOCUS FAR			button again in order to escape.
G-4.	PATTERN SET – SAVE
	To saving the filling data, move five keys to the right direction when the cursor is on
	SAVE. Then the cursor moves to the PATT NO.02 in order to prepare next pattern no.
G-5.	PATTERN SET – EXIT
	To escape this page, move five keys to the right direction

93