Speco Technologies & IP-WDRB1, IP-INTT5 user manual Appendix C To solve problem

Speco Technologies			IP Camera User’s Manual
		Interface	10/100Mbps
	Current Users		20
		Manual	Yes
	Recording@PC	Schedule	Yes
		Motion Detection	Yes
		Sensor event	Yes
	Event& Alarm	Sensor Trigger/Motion Detection	Yes
		Alarm Notification	SMS/E-MAIL/Alarm Sound(Option)
	Video Output		VBS:1.0Vp-p/75 Ohm
	Dimension		158.8φ (D) * 163.0mm(H)
PHYSICAL	Power Source		DC12V 1.0A
	Power Consumption (Max.)		12W Max
	Operational Temperature		0'C ~ 50'C
	Weight		1.7Kg
	Video Out		1
	RS485 Interface		1/1
CONNECTIVITY	Sensor In/Relay Out		2/2
	Ethernet Jack		RJ45(10Base-T/100Base-TX)
	Protocols		HTTP, FTP, SMTP, TCP, IP, DHCP,
			ICMP, NTP, DNS, DDNS
	Browser		Internet Explorer® Ver. 6.0+
REQUIREMENTS	Operating System		Windows® 2000/XP
	Processor		Intel® Pentium® Ⅲ1GHz+ (P4 2.4Ghz+ recommended)
	Memory		256MB+ (512MB+ recommended)

Appendix C To solve problem

C-1 Basic Check-point

C-1-1 Booting

￿Check if power plug is connected correctly.

C-1-2 Network cable (LAN cable) and cable connection check

￿Check if network cable is straight LAN cable. Hold each end of both side and check if same color’s cable is connected to same location in RJ-45 jack or not.

￿Check if network cable connects correctly with THE CAMERA.

￿Check if network cable connects correctly with Hub, IP sharing device and cable modem

etc….

*. If you found a problem in the product, first check with “C-1 Basic check point” and solve the

problem as following procedures:

C-2 Troubleshooting by type

C-2-1 Cannot connect with network

125