390742-002

Removal and Replacement Procedures— Small Form Factor (SFF) Chassis

5. Disconnect the power and data cables from the rear of the optical drive.

6.Rotate the drive cage down to its normal position before trying to remove the drive.

7.Press the green drive retainer latch and slide the drive forward and lift it from the drive cage.

8.When replacing the drive, transfer the four screws from the old drive to the new one. The screws take the place of drive rails.

ÄCAUTION: Use only 5-mm long screws as guide screws. Longer screws can damage the internal components of the drive.

7–28

HP dc7608 manual 390742-002