![](/images/new-backgrounds/1220669/22066987x1.webp)
Desktop Management
3.Insert the USB flash media device into one of the computer's USB ports and remove all other USB storage devices except USB diskette drives. Close the computer cover.
4.Plug in the power cord and turn on the computer.
5.As soon as the computer is turned on, press and hold the F10 key until you enter Computer Setup. Press Enter to bypass the title screen, if necessary.
✎If you do not press the F10 key at the appropriate time, you must restart the computer and press and hold the F10 key again to access the utility.
If you are using a PS/2 keyboard, you may see a Keyboard Error
6.Go to Advanced > PCI Devices to disable both the PATA and SATA controllers. When disabling the SATA controller, note the IRQ to which the controller is assigned. You will need to reassign the IRQ later. Exit setup, confirming the changes.
SATA IRQ: __________
7.Insert a bootable DOS diskette with FDISK.COM and either SYS.COM or FORMAT.COM into a diskette drive and turn on the computer to boot to the DOS diskette.
8.Run FDISK and delete any existing partitions on the USB flash media device. Create a new partition and mark it active. Exit FDISK by pressing the Esc key.
9.If the system did not automatically restart when exiting FDISK, press Ctrl+Alt+Del to reboot to the DOS diskette.
10.At the A:\ prompt, type FORMAT C: /S and press Enter. Format will format the USB flash media device, add the system files, and ask for a Volume Label.
11.Press Enter for no label or enter one if desired.
12.Turn off the computer and unplug the power cord. Open the computer and
13.Plug in the power cord, remove the diskette, and turn on the computer.
14.As soon as the computer is turned on, press and hold the F10 key until you enter Computer Setup. Press Enter to bypass the title screen, if necessary.
15.Go to Advanced > PCI Devices and
16.Save the changes and exit. The computer will boot to the USB flash media device as drive C.
✎The default boot order varies from computer to computer, and it can be changed in the Computer Setup (F10) Utility. Refer to the Computer Setup (F10) Utility Guide on the Documentation and Diagnostics CD for instructions.
If you have used a DOS version from Windows 9x, you may see a brief Windows logo screen. If you do not want this screen, add a
Return to “Copying to Multiple Computers.”
Service Reference Guide, dc7600 |