HP dc7608 manual MultiBay Riser Card

Removal and Replacement Procedures - Ultra-Slim Desktop (USDT) Chassis

8.5MultiBay Riser Card

ÄCAUTION: The MultiBay riser card must be removed before removing the front panel assembly. Failure to do so will damage the MultiBay riser card and the front panel assembly.

1.Prepare the computer for disassembly (Section 8.1).

2.Remove the access panel (Section 8.3).

3.Remove any MultiBay device in the drive cage (Section 8.4).

4.Grasp the green handle on top of the riser card assembly and lift it straight up.

✎The MultiBay riser card assembly serves a number of purposes: it provides data and power to an installed MultiBay device; it locks the front panel assembly in the chassis; and it secures the power supply in the chassis and prevents its front-to-back movement.

To reinstall the riser card, reverse the removal procedures.

8–6 390742-002 Service Reference Guide, dc7600