Chapter 2 Connecting your N3G002W Wireless Router
Connect the N3G002W Wireless Router to Your Network
Note: DO NOT connect N3G002W 3G Wireless Router to power before performing the installation steps below.
Step 1.
Attach the antenna.
1.Remove the antenna from its plastic wrapper.
2.Screw the antenna in a clockwise direction to the back panel of the unit.
3.Once secured, position the antenna upward at its connecting joint. This will ensure optimal reception.
Step 2.
If using a 3G PC Card, remove the dust cover from the WAN PCMCIA Card Slot by inserting a fingernail under the grooved section of the dust cover and pulling to remove.
YML894 Rev1 | N3G002W 3G Wireless Router User Guide |
www.netcomm.com.au | 9 |
