Time Settings, To set time manually | TP-Link TL-WR941ND instruction

4.16.1 Time Settings

TL-WR941NDWireless N Router

corresponding function. The detailed explanations for each submenu are provided below.

4.16.1 Time Settings

Choose menu “System Tools → Time Settings”, you can configure the time on the following screen.

Figure 4-72 Time settings

¾Time Zone - Select your local time zone from this drop-down list.

¾Date - Enter your local date in MM/DD/YY into the right blanks.

¾Time - Enter your local time in HH/MM/SS into the right blanks.

¾NTP Server I / NTP Server II - Enter the address or domain of the NTP Server I or NTP Server II, and then the Router will get the time from the NTP Server preferentially. In addition, the Router built-in some common NTP Servers, so it can get time automatically once it connects the Internet.

¾Enable Daylight Saving - Check the box to enable the Daylight Saving function.

¾Start - The time to start the Daylight Saving. Select the month in the first field, the week in the second field, the day in the third field and the time in the last field.

¾End - The time to end the Daylight Saving. Select the month in the first field, the week in the second field, the day in the third field and the time in the last field.

¾Daylight Saving Status - Displays the status whether the Daylight Saving is in use.

To set time manually:

1.Select your local time zone.

-82-

Image 91

TP-Link Time Settings, To set time manually, TL-WR941ND Wireless N Router

Contents

Rev 1.1.0 TL-WR941ND Wireless N Router FCC STATEMENT COPYRIGHT & TRADEMARKS Country FCC RF Radiation Exposure StatementCE Mark Warning National restrictions Korea Warning Statements Industry Canada StatementNCC Notice Page EN 550241998+A12001+A22003 EN 61000-3-22006+A12009+A22009 EN DECLARATION OF CONFORMITYETSI EN 300 328 ETSI EN 301 489-1 V1.8.12008& ETSI EN 301 489-17 EN 550222006 +A12007 Package Contents CONTENTSChapter DHCP 4.15.2 TL-WR941ND Wireless N Router Package Contents 1.1 Overview of the Router Flexible Access ControlSimple Installation Chapter 1.Introduction 1.3 Main Features Status 1.4 Panel Layout1.4.1 The Front Panel Name 1.4.2 The Rear Panel ¾ RESET 2.1 System Requirements Chapter 2.Connecting the Router2.2 Installation Environment Requirements 2.3 Connecting the Router Figure 2-1 Hardware Installation of the TL-WR941ND Wireless N Router 3.1 TCP/IP Configuration Chapter 3.Quick Installation Guide 1. Is the connection between your PC and the Router correct? Please check the connection following these stepsFigure 3-1 Success result of Ping command Figure 3-2 Failure result of Ping command 3.2 Quick Installation Guide Figure 3-6 Choose WAN Connection Type Figure 3-5 Quick Setup Figure 3-8 Quick Setup - MAC Clone Figure 3-7 Quick Setup - PPPoE Figure 3-10 Quick Setup - Static IP Figure 3-9 Quick Setup - MAC Clone Note Dialog ¾ WPA/WPA2-Personal - Select WPA based on pre-shared passphrase 4.6 Wireless Figure 3-13 Quick Setup - Finish 4.1 Login Chapter 4.Configuring the Router4.2 Status Figure 4-1 Router Status 4.3 Quick SetupPlease refer to 3.2 Quick Installation Guide 4.4 QSS Method One I. By PBC Method Two The QSS Configuration Screen of Wireless Adapter Method Three TL-WR941ND Wireless N Router II. By PIN Method Two Enter the PIN from my Router 4.5.1 WAN 4.5 Networkadded to the network Figure 4-5 WAN - Dynamic IP Figure 4-6 WAN - Static IP Figure 4-7 WAN - PPPoE Figure 4-8 PPPoE Advanced Settings NSW / ACT - nsw.bigpond.net.au QLD - qld.bigpond.net.au Figure 4-10 L2TP Settings Figure 4-11 PPTP Settings z Static IP - Connections which use static IP address assignment z Dynamic IP - Connections which use dynamic IP address assignment Figure 4-13 MAC Address Clone 4.5.2 LAN4.5.3 MAC Clone Figure 4-12 LAN 4.6.1 Wireless Settings 4.6 WirelessOnly the PC on your LAN can use the MAC Address Clone function Figure 4-15 Wireless Settings ¾ Mode - Select the desired mode. The default setting is 11bgn mixed 4.6.2 Wireless Security ¾ WPA /WPA2 - Enterprise - It’s based on Radius Server Encryption - You can select either Automatic, or TKIP or AES Figure 4-20 Wireless MAC address Filtering 4.6.3 Wireless MAC Filtering 4. Click the Save button to save this entry to access for Filtering Rules 4.6.4 Wireless Advanced 4.6.5 Wireless Statistics 4.7 DHCP 4.7.1 DHCP SettingsThis page will be refreshed automatically every 5 seconds ¾ Default Domain - Optional. Input the domain name of your network 4.7.3 Address Reservation 4.7.2 DHCP Clients List To Reserve IP addresses 4.8 ForwardingTo modify or delete an existing entry 4.8.1 Virtual Servers To set up a virtual server entry Figure 4-31 Add or Modify a Virtual Server Entry 4.8.2 Port Triggering To add a new rule, follow the steps below 3. Incoming Port Range cannot overlap each other 4.8.3 DMZ To assign a computer or server to be a DMZ server 4.8.4 UPnP 4.9.1 Basic Security 4.9 Security z z z Figure 4-37 Basic Security 4.9.2 Advanced Security 4.9.3 Local Management Figure 4-39 Local Management 4.9.4 Remote Management Figure 4-40 Remote Management 4.10Parental Control To add a new entry, please follow the steps below 7. Click the Save button 4.11.1 Rule 4.11Access Control Figure 4-45 Access Control Rule Management To add a new rule, please follow the steps below Figure 4-46 Add or Modify Internet Access Control Entry Figure 4-47 Host Settings 4.11.2 Host Figure 4-49 Add or Modify a Host Entry Figure 4-48 Add or Modify a Host Entry Figure 4-50 Target Settings 4.11.3 Target Figure 4-52 Add or Modify an Access Target Entry Figure 4-51 Add or Modify an Access Target Entry To add a new schedule, follow the steps below 4.11.4 Schedule Figure 4-54 Advanced Schedule Settings 4.12 Advanced RoutingFigure 4-55 Advanced Routing 4.12.1 Static Routing List Other configurations for the entriesTo add static routing entries 4.12.2 System Routing Table 4.13Bandwidth Control 4.13.2 Rules List 4.13.1 Control Settings 4.14.1 Binding Setting 4.14IP & MAC Binding SettingTo add/modify a Bandwidth Control rule, follow the steps below Figure 4-64 Binding Setting To add IP & MAC Binding entries, follow the steps belowTo modify or delete an existing entry, follow the steps below To find an existing entry, follow the steps below Figure 4-66 Find IP & MAC Binding Entry 4.14.2 ARP ListFigure 4-67 ARP List 4.15.1 Comexe.cn DDNS 4.15Dynamic DNS 4.15.2 Dyndns.org DDNS To set up for DDNS, follow these instructions Figure 4-69 Dyndns.org DDNS Settings 4.15.3 No-ip.com DDNS Figure 4-70 No-ip.com DDNS Settings 4.16System ToolsFigure 4-71 The System Tools menu To set time manually 4.16.1 Time Settings 2. The time will be lost if the router is turned off 4.16.2 DiagnosticTo set time automatically To set Daylight Saving Figure 4-73 Diagnostic Tools To upgrade the Routers firmware, follow these instructions below 4.16.3 Firmware Upgrade 4.16.5 Backup & Restore 4.16.4 Factory Defaults4. The Router will reboot after the upgrading has been finished 4.16.6 Reboot 4.16.8 System Log 4.16.7 Password Figure 4-80 System Log Figure 4-81 Mail Account Settings Figure 4-82 Statistics 4.16.9 Statistics TL-WR941ND Wireless N RouterStatistics Table 1. How do I configure the Router to access Internet by ADSL users? Appendix A FAQ Figure A-3 MAC Clone 3. I want to use Netmeeting, what do I need to do?Figure A-4 Virtual Servers Figure A-6 DMZ Figure A-5 Add or Modify a Virtual server Entry 4. I want to build a WEB Server on the LAN, what should I do? field of the Web browser 5. The wireless stations cannot connect to the Router 1. Install TCP/IP component Appendix B Configuring the PCs Figure B-2 ¾ Setting IP address automaticallyNow you have two ways to configure the TCP/IP protocol below shown in the Figure below Figure B-3 ¾ Setting IP address manually Figure B-4 Environmental and Physical Appendix C SpecificationsWireless General Appendix D Glossary identifying a wireless local area network. For the wireless devices in a network to communicate with each other, all devices must be configured with the same SSID. This is typically the configuration parameter for a wireless PC card. It corresponds to the ESSID in the wireless Access Point and to the wireless network name