Setting the Controls

o Your refrigerator has a control pad on the dispenser that lets you regulate the temperature in the freezer and refrigerator compartments.

o Initially set the REFRIGERATOR CONTROL at 37°F (3°C) and the FREEZER CONTROL at 0°F (-18°C). Leave it at this setting for 24 hours (one day) to stabilize. Then adjust the compartment temperature as desired.

o Refrigerator Temp Control: 33°F to 46°F (0°C to 8°C) The lower the number setting, the colder the refrigerator compartment will become.

. Freezer Temp Control:-6°F to 8°F (-21°C to -13°C) When the setting is at a lower number, the freezer compartment becomes colder. The refrigerator compartment becomes warmer because less cold air flows into the refrigerator.

NOTE: If you want to change °F to °C or the reverse, press and hold FREEZER key and REFRIGERATOR key simultaneously for 5 seconds or more.

NOTE: If you want to off display, press and hold ICE

PLUS key and FREEZER key over 5 seconds at the same time.

ADJUSTING CONTROL SETTINGS

Give the refrigerator time to cool down completely before adding food. It is best to wait 24 hours before you put food into the refrigerator. The mid-settings indicated in the previous section should be correct for normal household refrigerator usage. The controls are set correctly when

milk or juice is as cold as you like and when ice cream is firm.

The refrigerator control functions as the thermostat for the entire appliance (refrigerator and freezer sections.) The higher the number setting, the longer the compressor will run to keep the temperature colder. The freezer control adjusts the cold air flow from the freezer to the refrigerator. Setting the freezer control to a lower temperature keeps more cold air in the Freezer compartment to make it colder.

If you need to adjust temperatures in the refrigerator or freezer, start by adjusting the refrigerator first. Wait 24 hours after the refrigerator adjustment to check the freezer temperature. If it is too warm or too cold, then adjust the freezer control as well.

Use the settings listed in the chart below as a guide. Always remember to wait at least 24 hours between adjustments.

	RECOMMENDED
CONDITION/REASON:	ADJUSTMENT:
REFRIGERATOR section	Turn
too warm	REFRIGERATOR
Door opened often	control to next
Large amount of food added	higher number,
Room temperature very warm	wait 24 hours,
	then re-check

NOTE: Touch display once to activate, then touch again to change the settings or activate a function. If 10 seconds has passed since the display has been touched, it will be necessary to touch "once" again to reactivate.

*This is to prevent accidental display setting changes.

"ICE PLUS : Press the ICE PLUS button and the LED will turn on. This function will remain activated for 24 hours and increase the cooling speed of the freezer and the amount of ice produced.

,,Dispenser Lock : Press and hold the LOCK button for 3 seconds to lock the dispenser.

When it is locked, the dispenser will not operate. To unlock, press and hold the LOCK button for 3 seconds.

o Filter Reset : It displays in months the number of months left to exchange the filter from the moment power is connected to the refrigerator. If you have

changed the filter after 6 months of use, press and hold the FILTER button 3 seconds or more and the filter

display will be initialized with a buzzing sound. NOTE: The average life of the filter is 6 months.

[]WARNING: If a door is open, the dispenser does not work.

FREEZER section too warm/ ice not made fast enough

Door opened often

Large amount of food added Very cold room temperature (can'tcycle often enough)

Heavy ice usage

Air vents blocked by items

REFRIGERATOR section too cold

Controls not set correctly for your conditions

FREEZER section too cold

Controls not set correctly for your conditions

Turn FREEZER control to next

higher number, wait 24 hours, Then re-check

Move items out of airstream

Turn

REFRIGERATOR

control to next lower number, wait 24 hours, then re-check

Turn FREEZER

control to next lower number,

wait 24 hours, then re-check