LG Electronics LFC22760 manual Operation Instructions, Normal Sounds YOU MAY Hear

Page 28

NOTE: Automatic Ice Maker feature is included only in certain models. Please check your product specification.

Personal Injury Hazard

Avoid contact with the moving parts of the ejector mechanism, or with the heating element that releases the cubes. DO NOT place fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in.

OPERATION INSTRUCTIONS

A newly-installed refrigerator may take 12 to 24 hours to begin making ice.

Icemaker

 

 

FeelerArm

Cube Size

 

Power Switch

Indicator Light

Cube

Size

 

Select

Button

The icemaker will produce eight cubes per cycle approximately 100 - 130 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other operating conditions.

If the refrigerator is used before the water connection is made to the icemaker, set the power switch to O (off).

When the refrigerator has been connected to the water supply, set the power switch to I (on).

The icemaker will fill with water when it cools to freezing. A newly-installed refrigerator may take 12 to 24 hours to begin making ice cubes.

Throw away the first few batches of ice to allow the water line to clear.

Be sure nothing interferes with the sweep of the feeler arm.

When the bin fills to the level of the feeler arm, the icemaker will stop producing ice.

It is normal for several cubes to be stuck together.

If ice is not used frequently, old ice cubes will become cloudy, taste stale, and shrink.

NOTE: If the cube size is smaller or larger than you expected, you can regulate the size with the cube size button. (nomally caused by variations in water pressure.)

Every time you press the cube size button, the indicator light go up. The higher position light is on, the larger cubes will be. (1st step is the next after the 5th step.)

WHEN YOU SHOULD SETTHE ICEMAKER

POWER SWITCH TO O (OFF)

•When the water supply will be shut off for several hours.

. When the ice storage bin is removed for more than a minute or two,

° When the refrigerator will not be used for several days.

NORMAL SOUNDS YOU MAY HEAR

•The icemaker water valve will buzz as the icemaker fills with water. If the power switch is in the I (on) position, it will buzz even if it has not yet been hooked up to water. To stop the buzzing, move the power switch to O (off).

NOTE: Keeping the power switch in the I (on) position before the water line is connected can damage the icemaker.

•You will hear the sound of cubes dropping into the bin and water running in the pipes as the icemaker refills.

PREPARING FOR VACATION

Set the icemaker power switch to O (off) and shut off the water supply to the refrigerator.

If the ambient temperature will drop below freezing, have a qualified servicer drain the water supply system (on some models) to prevent serious property damage due to flooding from ruptured water lines or connections.

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Rador Elador About the Custom English Version French Version Warranty Safety InstructionsWater Line LG Electronics CustomerAssistance Numbers Product Parts LaborPeriodo de Garantia del refrigerador/Congelador Estados Unidos de Am6ricaPartes Mano de Obra Para obtener informacionPage To Connect Electricity Recommended Grounding MethodBefore YOU Throw Away Your OLD Refrigerator Or Freezer USE of Extension CordsUsethissectionto becomemorefamiliarwiththepartsandfeatures Installation When Moving Your RefrigeratorUnpacking Your Refrigerator NextHowto Remove Door Handles Howto Replace Door HandlesRight Door Replacing Refrigerator Door Right Door Left DoorRemoving Refrigerator Door FigureACorrect HOW to Remove and Install the Pullout Drawer Removing Pulout DrawerInstalling Pullout Drawer Leveling and Door Alignment LevelingDoor Alarm Setting the ControlsEnsuring Proper AIR Circulation MULTI-FLOWSetting the Controls Adjusting Control SettingsFood Storage Guide Storing Frozen FoodStoring Fresh Food MilkRefrigerator Shelves To remove a sliding shelf from its metal frameChef Fresh / Snack PAN Obtibin CrispersCrisper Humidity Control On some modelsCrisper Cover with Lattice on Inner Surface on some modelsDESIGN-A-DOOR Dairy BINHow to use ICE BIN on some modelsTilting Door on some models Durabase on some modelsFilter on some models Water DispenserPull out the cartridge General Cleaning Tips Light Bulb ReplacementOutside Condenser CoilsWhen YOU GO on Vacation Power InterruptionsWhen YOU Move When YOU should Setthe Icemaker Power Switch to O OFF Operation InstructionsNormal Sounds YOU MAY Hear Preparing for VacationPower drill Before YOU BeginWhat YOU will Need = Choose ThevalvelocationFasten the Shutoff Valve = Tighten the Pipe ClampConnect the Tubing to the Valve Flush OUT the Tubing= Connect the Tubing to the Refrigerator TU RN TH E Water on AT the Shutoff ValvePlug in the Refrigerator Start the IcemakerUnderstanding Sounds YOU MAY Hear Refrigerator does not OperateVibration or Rattling Noise Lights do not WorkCompressor Motor Seems to RUN TOO Much Doors will not Close CompletelyFrost or ICE Crystals on Frozen Food Check ThenICE has OFF-TASTE or Odor There is Water in the Defrost Drain PANRefrigerator Seems to Make TOO Much Noise Cubes Produced by Icemaker are TOO SmallTemperature is TOO Warm or There Automatic Icemaker does not WorkIs Interior Moisture Buildup Heck if
Top Page Image Contents