Waterford Appliances Stainless Stell Cooker manual Main Oven Programmer, Automatic Use

Automatic Use:

End Time” button and set the desired cooking end time using the “-” and “+” buttons. The cook pot symbol is switched off. Set the function sele- ctor to the desired oven function and the oven ther- mostat to the desired temperature. The symbol will appear when the programme starts and an audible signal will sound when the programme ends. Press the “minute minder” button to cancel the audible signal.

Semi-Automatic Operation

Minute Minder

Cooking Duration

Cooking End Time

Decrease Set Time

Increase Set Time

Function Button

This mode should be used when the oven is in operation or if it is desired to programme its use from the time of setting the programme. Set the function selector to the desired oven function and the oven thermostat to the desired temperature. Press and hold the “Cooking Duration” time using the “-” and “+” buttons. The “A” and the symbols will appear on the display. An audible signal will sound when the programme ends and pressing the “Minute Minder” button will cancel this sound. In order to cancel a programme, set the programmer for manual operation by pressing the “Cooking Duration” and “Cooking End Time” but- tons. In the event of a programme being set up

Prior to using the automatic function with the main oven, the time must be set on the digital program- mer. Press and hold the “Cooking Duration” button and the “Cooking End Time” button simultaneous- ly, and adjust the time using “-” and “+” buttons. The main oven can then be operated in the two dif- ferent automatic modes:

Fully Automatic Operation

Press & hold the “Cooking Duration” button and set the desired cooking duration time using the “-” and “+” buttons. The “A” and the symbols will app- ear on the display. Press and hold the “Cooking

incorrectly (i.e. the time of day is in between the calculated cooking start and end times), the audi- ble signal will sound and the symbol “A” will flash.

Minute Minder:

The digital programmer also has a timer feature incorporated in it. Press and hold the “Minute Minder” button and set the desired time period using the “-” and “+” buttons. When the time has elapsed “ ” is displayed and an audible signal sounds. Press the “Minute Minder” button to can- cel.

(Applicable to 90, 100, & 120cm Models)

The secondary electric oven is controlled using the secondary oven control knob (Refer to section on Control Panel Layout). This oven has five different functions which are operated as follows:

Fig. 15

Fig. 16

Function 1: Static Oven (Temperature Settings) This operates the top and bottom elements in the oven with the heat output controlled by the oven