ttOW10 USE
SETTING THE FUNCTIONS
Press the button for the desired function to vieW and
select other settings.
SETTING | THE DISPENSER | LOCK |
| PreSS and hold the | |
| ALARM/LOCK | |
| button for | three seconds |
| to lock the dispenser and | |
| all of the other control panel | |
i_ | functions. | Press and hold |
| again for 3 seconds to | |
| unlock. |
|
SETTING THE DOOR ALARM
The ALARM/LOCK button also controls the door alarm that sounds three times in
compartment door is
K1))left open for more than 60 seconds. The alarm stops sounding when the door is closed.
Press the ALARM/LOCK button once to activate and deactivate the door alarm function.
NOTE: Contact your local service center if the alarm continues to sound after the doors are closed.
RESETTING THE FILTER INDICATOR
|
| Press and hold the | |
|
| LIGHT/FILTER | button for more |
|
| than 3 seconds to reset | |
|
| the filter indicator after the | |
|
| water filter has | been |
t_ | CHANGE | replaced. |
|
...... |
| ||
nj | MONT, |
|
|
NOTE: It is recommended that you replace the filter when the water filter indicator light reaches 0 or whenever the water or ice cube taste deteriorates noticeably.
ACTIVATING | ICE PLUS |
| Press the ICE PLUS button |
| once to activate the ICE PLUS |
| function. The ICE PLUS icon on |
| the display panel will illuminate |
| when activated. |
...._ | The ICE PLUS function runs the |
| freezer compartment at the |
| coldest setting for a |
| period to increase icemaking by |
| up to about 20%, and then turns |
| off automatically. |
NOTE: Press the button again to cancel the ICE PLUS function.
DIAGNOSTIC FAILURE DETECTION
The diagnostic function automatically detects problems with your refrigerator, and a diagnostic code will appear in the display. NOTE: If a diagnostic code appears in the display during use, note the code and
then call
26