Liebherr CI16, CS16 manual Vegetable Drawer Figure, Interior Light

Page 14

CI_16_CS_16 Use Manual.qxd 1/12/2004 3:08 PM Page 9

REFRIGERATOR COMPARTMENT

Vegetable Drawer - Figure 6

Figure 6

Replacing the bulb:

!WARNING

To prevent possible injury due to an electrical shock, be sure to disconnect the power cord or turn OFF the circuit breaker before replacing the interior light bulb(s) or cleaning the appliance.

To remove the vegetable drawer:

Pull the drawer straight out, grip at the back and lift out.

To install the vegetable drawer:

Place the drawer on the rails. The rails must be fully extended and aligned with the front of the drawer. Slide the drawer in.

Interior Light

This turns OFF automatically after the door has been opened for approximately 15 minutes. If it does not turn ON when the door is opened briefly, but the temperature display is working, the bulb(s) may be defective.

The light is located behind the cover located at the top of the refrigerator compartment and has two bulbs.

Bulb data:

120 V, Maximum wattage - 25 W Bulb fitting - E14

Current and voltage must agree with details on the model plate.

!CAUTION

To prevent possible injury due to broken glass, use hand protection when replacing the interior light bulb(s).

2

1

3

Figure 7

1.Remove the two screws securing the cover (Fig. 7, 1). Pull the cover straight out.

2.Remove the glass plate (Fig. 7, 2).

3.Remove the defective bulb. Make sure the seal (Fig. 7, 3) is placed on the new bulb before installing it.

4.Install the glass plate and cover.

CI 16/CS 16

9

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Use and Care Manual Additional benefits CI 16/CS Features CI16CS16 Use Manual.qxd 1/12/2004 308 PM Table of Contents Disposal of Old Appliance SafetyImportant Safety Information IceMaker if equipped Electrical SafetySafety Instructions Unpacking Disposal of CartonSetting the Temperature Figure Safety RegulationsChanging the Temperature OperationTo increase the temperature Temperature Display FigureAudible Warning Signal Figure Childproof Lock FigurePower Failure/Frost-Control Supercooling FigureShelf Arrangement Refrigerator CompartmentArranging Food Figure Vegetable Drawer Figure Interior LightFreezing with Superfrost Figure Freezer CompartmentFreezing, Storage Figure Information System FigureFood to Freeze Freezing and StorageDo Not Freeze Connection to the Water Supply IcemakerWater Connection To turn on To Clean the IceMakerTo Start the IceMaker To turn offIceMaker Troubleshooting Problem Possible Cause and RemedyDefrosting DEFROSTING/CLEANINGCleaning Vacation TipsTroubleshooting Customer Service Figure Appliance InformationWarranty Liebherr Warranty Plan for U.S. onlyCI 16/CS CI16CS16 Use Manual.qxd 1/12/2004 308 PM EURO-LINE Appliances
Related manuals
Manual 21 pages 63.51 Kb

CS16, CI16 specifications

Liebherr, a name synonymous with high-quality engineering and innovation in the machinery and construction industry, has made waves with its latest models, the CI16 and CS16. These compact excavators are designed to deliver superior performance and efficiency in various applications, making them a popular choice among contractors and operators alike.

The Liebherr CI16 and CS16 are equipped with powerful diesel engines that provide ample horsepower while ensuring low fuel consumption and emissions. The machines are built with an emphasis on energy efficiency, adhering to the latest environmental regulations without compromising on performance. The engines support advanced technologies such as common rail fuel injection and turbocharging, which enhance power output and efficiency.

One of the standout features of the CI16 and CS16 models is their compact design, allowing operators to maneuver easily in confined spaces. This is particularly beneficial in urban environments or restricted job sites where larger machinery may struggle. Despite their smaller size, these excavators boast impressive digging and lifting capacities, making them capable of handling a wide range of tasks, from excavation to landscaping and trenching.

The ergonomic cab design of both models ensures that operators enjoy a comfortable working environment. The spacious cabin is equipped with adjustable seating, climate control, and advanced visibility, providing a clear line of sight to the work area. The intuitive controls enable precise operation, reducing operator fatigue and enhancing productivity throughout the workday.

Both CI16 and CS16 feature advanced hydraulic systems that provide quick response times and smooth operation. The option to customize hydraulic flow allows operators to tailor the machine's performance based on the attachments being used, maximizing versatility. Various attachments are compatible, including buckets, hammers, and grapples, further extending the utility of these machines.

Safety is paramount in the design of the Liebherr CI16 and CS16. Each excavator is equipped with features such as a reinforced cab structure, emergency stop buttons, and advanced monitoring systems. These ensure both operator safety and the protection of job site personnel.

Overall, the Liebherr CI16 and CS16 models represent a blend of power, efficiency, and precision. Their advanced technologies and user-focused design make them ideal for modern construction and landscaping challenges, solidifying Liebherr's commitment to innovation in the machinery industry. Whether for major construction projects or smaller jobs, these excavators offer the reliability and performance that Liebherr is known for.
Top Page Image Contents