Liebherr CS16, CI16 manual Icemaker, Water Connection, Connection to the Water Supply

Page 17
Figure 10

CI_16_CS_16 Use Manual.qxd 1/12/2004 3:08 PM Page 12

ICEMAKER

Water Connection

Please read the first three points of the safety instructions and warnings before connecting the appliance to the main water supply.

•The water pressure must be between 21.8-87.0 psi (1.5-6 bar).

•Use a 1/4 inch OD copper line to connect the water supply to the solenoid valve. This is not supplied with the refrigerator (Figure 9).

•A shut-off valve, such as the saddle valve illustration here, must be installed between the hose line and the main water supply so the water supply can be stopped if necessary.

Do not install the shut-off valve behind the refrigeration unit.

Figure 9

•If you have hard water, we recommend you install a water softener. Also, a filter must be installed if the water contains solids such as sand.

•All equipment and devices used to supply the water to the appliance must comply with the current regulations for your geographical area.

Connection to the Water Supply

1.Install the shut-off valve, water filter and automatic shut-off device as required.

Note

The solenoid valve is located at the rear of your unit.

2.The 1/4 inch copper tubing between the

shut-off valve and solenoid valve has a

3/4 inch male connector (Figure

10). Make sure there is approximately 27 inches (68.6 cm) of

excess tubing behind 3/4" the unit for easy connection.

Note

A 3/4 inch to a 1/4 inch adapter is supplied with the icemaker.

3.Open the shut-off valve for the water supply and check the

entire water system for

leaks. Before the appliance is used for the first time a licensed plumber should bleed air from the system.

4.Insert the electrical plug for the combined refrigerator/freezer into the electrical outlet (Figure 11).

5.Move the combined refrigerator-freezer into final position in the room.

Figure 11

12

CI 16/CS 16

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Use and Care Manual Additional benefits CI 16/CS Features CI16CS16 Use Manual.qxd 1/12/2004 308 PM Table of Contents Disposal of Old Appliance SafetyImportant Safety Information IceMaker if equipped Electrical SafetySafety Instructions Disposal of Carton UnpackingChanging the Temperature Safety RegulationsSetting the Temperature Figure OperationAudible Warning Signal Figure Temperature Display FigureTo increase the temperature Childproof Lock FigureSupercooling Figure Power Failure/Frost-ControlShelf Arrangement Refrigerator CompartmentArranging Food Figure Interior Light Vegetable Drawer FigureFreezing, Storage Figure Freezer CompartmentFreezing with Superfrost Figure Information System FigureFood to Freeze Freezing and StorageDo Not Freeze Connection to the Water Supply IcemakerWater Connection To Start the IceMaker To Clean the IceMakerTo turn on To turn offProblem Possible Cause and Remedy IceMaker TroubleshootingCleaning DEFROSTING/CLEANINGDefrosting Vacation TipsTroubleshooting Appliance Information Customer Service FigureLiebherr Warranty Plan for U.S. only WarrantyCI 16/CS CI16CS16 Use Manual.qxd 1/12/2004 308 PM EURO-LINE Appliances
Related manuals
Manual 21 pages 63.51 Kb

CS16, CI16 specifications

Liebherr, a name synonymous with high-quality engineering and innovation in the machinery and construction industry, has made waves with its latest models, the CI16 and CS16. These compact excavators are designed to deliver superior performance and efficiency in various applications, making them a popular choice among contractors and operators alike.

The Liebherr CI16 and CS16 are equipped with powerful diesel engines that provide ample horsepower while ensuring low fuel consumption and emissions. The machines are built with an emphasis on energy efficiency, adhering to the latest environmental regulations without compromising on performance. The engines support advanced technologies such as common rail fuel injection and turbocharging, which enhance power output and efficiency.

One of the standout features of the CI16 and CS16 models is their compact design, allowing operators to maneuver easily in confined spaces. This is particularly beneficial in urban environments or restricted job sites where larger machinery may struggle. Despite their smaller size, these excavators boast impressive digging and lifting capacities, making them capable of handling a wide range of tasks, from excavation to landscaping and trenching.

The ergonomic cab design of both models ensures that operators enjoy a comfortable working environment. The spacious cabin is equipped with adjustable seating, climate control, and advanced visibility, providing a clear line of sight to the work area. The intuitive controls enable precise operation, reducing operator fatigue and enhancing productivity throughout the workday.

Both CI16 and CS16 feature advanced hydraulic systems that provide quick response times and smooth operation. The option to customize hydraulic flow allows operators to tailor the machine's performance based on the attachments being used, maximizing versatility. Various attachments are compatible, including buckets, hammers, and grapples, further extending the utility of these machines.

Safety is paramount in the design of the Liebherr CI16 and CS16. Each excavator is equipped with features such as a reinforced cab structure, emergency stop buttons, and advanced monitoring systems. These ensure both operator safety and the protection of job site personnel.

Overall, the Liebherr CI16 and CS16 models represent a blend of power, efficiency, and precision. Their advanced technologies and user-focused design make them ideal for modern construction and landscaping challenges, solidifying Liebherr's commitment to innovation in the machinery industry. Whether for major construction projects or smaller jobs, these excavators offer the reliability and performance that Liebherr is known for.
Top Page Image Contents