Liebherr HC1060, HC1011 installation instructions Height of the refrigerator door panel is

Page 7

Kitchen Cabinet Construction

Fig. 7

3

Fridge compartement door

1 Unit door fridge compartement

2 Unit door freezer comparte-

4

Freezer compartement door

ment

 

 

Of course, the final door height depends on the gap position

The freezer door height is 24-24/32 in. (629 mm).

u To cover the lower part of the appliance: increase the

of the cabinets that stand to the left and right of the appli-

height of the panel to 27-3/32 in. (695 mm).

ance cabinet.

The thickness of the floor board is usually 3/4 in. (19 mm).

If there is other furniture standing close to the appliance

u To cover the face side of the floor boardFig.7 (a): increase

cabinet this furniture typically has a gap between two draw-

the height of the panel to 27-3/8 in. + 3/4 in. = 28-1/8 in.

ers or two doors. Depending on your kitchen, these gaps

( 695 mm + 19 mm = 714 mm ).

 

 

are approximately 1/8 in. (3 mm) wide.

Without door panels on the unit, there is a gap of 19/32 in.

u In this case, increase the height of the panel to 27-3/8 in.

(15 mm) betwenn the freezer Fig. 7 (4) and the refrigerator

+ 3/4 in. + 19/32 in. - 1/8 in. = 28-19/32 in. ( 695 mm +

door Fig. 7 (3). After the installation of the cabinet doors, the

19 mm + 15 mm - 3 mm = 726 mm ).

gap between the two doors Fig. 7 (1,2)

will only be around

The height of the refrigerator door panel is:

1/8 in. (3 mm) and must be in the hatched area.

 

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Installation Instructions General safety information General safety information ContentsSetting up the appliance Re-attaching the soft stop mecha- nism Changing the door hingesTo detach the soft stop mecha- nism Reversing the doorKitchen Cabinet Airflow Kitchen Cabinet ConstructionDesigning the Kitchen Cabinet Electrical outlet Power cord Level Fish line for power cordDesigning the Kitchen Cabinet Doors Height of the refrigerator door panel is Water supply InstallationFor appliances with a fixed water supply for the IceMaker With 3/4 19 mm thick unit With 5/8 16 mm thick unitTo secure the appliance in the recess For chipboard doors Fitting the unit doorsFor a 23-5/8 600 mm wide recess For a 24 609.6 mm wide recessFor large unit doors Connecting the applianceConnecting the appliance Connecting the appliance

HC1060, HC1011 specifications

The Liebherr HC1011 and HC1060 are advanced tower cranes known for their exceptional performance and reliability in construction projects. These models are part of Liebherr's commitment to engineering excellence, providing efficient solutions for high-rise building and heavy lifting tasks.

The Liebherr HC1011 crane features a maximum lifting capacity of 10 tons and a jib length of 50 meters, making it ideal for a wide range of construction applications. It is equipped with a robust hoisting mechanism that ensures smooth and precise lifting operations. The crane's modular design allows for easy assembly and dismantling, reducing setup time on construction sites.

One of the standout features of the HC1011 is its advanced control system, which integrates modern technology to enhance operational efficiency. The crane is equipped with Liebherr’s innovative Litronic control system, providing real-time monitoring and diagnostics. This system enables operators to make informed decisions based on live data, optimizing performance and safety.

The Liebherr HC1060, on the other hand, is designed for larger projects with a maximum lifting capacity of 12 tons and an impressive jib length of 60 meters. This model delivers exceptional reach and versatility, accommodating the needs of complex construction sites. Similar to the HC1011, the HC1060 also features the Litronic control system, enabling operators to manage lifting operations with precision.

Both models are distinguished by their high-quality materials and cutting-edge engineering. The cranes are built to withstand harsh weather conditions and heavy-duty use, ensuring durability and longevity. The ergonomic design of the operator’s cabin provides comfort and visibility, allowing for efficient monitoring of lifting operations.

In terms of technology, the Liebherr HC series incorporates advanced safety features, including overload protection and automatic lubrication systems. These innovations ensure safe operation and reduce maintenance requirements, allowing construction teams to focus on their projects.

In summary, the Liebherr HC1011 and HC1060 tower cranes are exemplary machines in the construction industry, characterized by their heavy lifting capabilities, innovative control systems, and robust construction. Their combination of technology and design makes them ideal for handling demanding construction tasks, ensuring that projects are completed safely and efficiently.
Top Page Image Contents