Liebherr WFI1051, WF1051 manual Freezer Compartment Cleaning, Wine cooler zone, Freezer compartment

FREEZER COMPARTMENT CLEANING

Cleaning

Notes on defrosting

The NoFrost system automatically defrosts the appliance.

Wine cooler zone

The wine cooler compartment defrosts automatically. The water that forms on the rear wall wil evaporate through the compres- sor heat.

Make sure the defrost water can flow freely through the drain.

WWipe the cover strip's rubber lip with a damp cloth and a cleaning agent with a neutral pH value.

Freezer compartment

Any moisture arising collects on the glass shelves and freezes, and is periodically defrosted and evaporated.

The automatic defrosting system keeps the freezer frost-free and eliminates the time and effort spent on defrosting manually.

!WARNING

Cleaning

Always switch off the appliance, discon- nect the power cord or turn off the circuit breaker before cleaning.

Do not use steam cleaning equipment. Failure to follow these instructions may result in death or serious injury.

WClean the outer walls, inside and equipment, except the wooden grid shelves, by hand with lukewarm water and a little detergent. Because of the risk of injury and damage to the appliance, steam cleaning equipment should not be used.

WNever clean the glass door* with abrasive agents or rough cloths. The surfaces of the door and frame could become matt and scratched. We recommend using a commercially available glass cleaner. When cleaning the stainless-steel frame, ensure that no cleaning agent comes into contact with the glass surface and plastic frame. The surfaces could be scratched.

WWe recommend using a soft cloth and an all-purpose cleaner with a neutral pH value. Only use food compatible cleaning and care agents on the inside of the appliance.

WUse a commercially available stainless-steel cleaning agent

for stainless-steel appliances.

- In order to achieve best possible protection, apply a stain- less-steel care agent uniformly in grinding direction after cleaning. Points which are darker at the start and a more intensive coloration of the stainless-steel surface are normal.

- Do not use abrasive sponges or scourers, do not use con- centrated cleaning agents and never use cleaning agents containing sand, chloride or acid or chemical solvents, as these would damage the surfaces and could cause corro- sion.

WDo not allow cleaning water to run down the drain gulley or to

penetrate the ventilation grilles or electrical components. Dry the appliance.

- Do not damage or remove the type plate on the inside of the appliance. It is very important for servicing purposes.

WThe dust should be removed from the wine cooler / freezer unit and heat

exchanger - metal grid at the back of the appliance - once a year. Dust de- posits increase energy consumption.

W Ensure that none of the wires or other

components are dislodged, bent or damaged.

WThen connect/switch on the appliance and start to insert the food to be frozen as the temperature drops.

If the appliance is to be left switched off for any length of time, empty the appliance, disconnect from the power source, clean as described above and leave the door open so as to avoid odours.

Replacing the interior light

You can change the light yourself. The required lighting ele- ment 2, dissipator with light emitting diode (LED), is available from your dealer.

Changing the light:

W Switch off the appliance. Discon- nect the power cord or turn off the circuit breaker.

W Press the bulb cover 1 against the compartment roof 1 and release by pulling forwards 2.

WUnscrew the lighting element 2,

dissipator with LED, and loosen the cable connector 3.

W Re-assemble with new lighting element 2, working in reverse order.

A delight in freshness

10 WF1051 / WFI 1051