Levelling the appliance

1.Adjust the height of the appliance at the front by twisting the adjustable

feet 1 (A/F 27). Use theopen-endedspanner provided.

Caution!

The front feet of the ap- pliance must be firmly placed on the floor.

Fasten the appliance in the recess

Fasten the appliance in the recess through the upper and lower hinges of the refrigerator doors.

Use 2 screws for each hinge.

screws

(4 x 16 mm)

2.Adjusttheheightoftheappliance attherearbyturningtheadjusting bars 2.

Turn the adjusting bars clock- wiseuntilthecompressormount- ing plate touches the anti-tipping bracket.

Before fitting the door panels

Remove the cover 1and unscrew the attachment bracket 2 from the refrigerator doors. These attachment brackets will be mounted onto the refrigerator door panels.

Important!

The securing nuts are needed for re-mounting the pre- assembled door panels onto the refrigerator doors.

Adjusting the front of the drawer

If required, the front of the freezer drawers can be adjusted. Transfer the screws shown in the illustration (on the left and right sides of the freezer drawer) individually to the long slots below. Tighten the screws in the front of the drawer once it is in the right position.

Side view of the freezer drawer pulled out

Unscrew the attachment brackets 3from the freezer drawers. These attachment brackets will be mounted onto the freezer panels.

Important!

The screws are needed for re-mounting the pre-assembled freezer panels onto the freezer drawers.