Liebherr 7083-103-00 Mounting the attachment brackets onto the door panels, Fig. a

Page 11

Mounting the attachment brackets onto the door panels

Mark lines on the refrigerator door panels as shown in Fig. A.

Align the dismounted brackets of the refrigerator doors to the lines on the refrigerator door panels as shown in Fig. A 1. Fasten each bracket with any hole wherever possible using a minimum of 6 screws 4 x 16 mm.

Fasten the brackets provided onto the freezer drawer panels using three screws (4 x 16 mm) for each bracket (Fig. A2).

Refrigerator door panels

Freezer drawer panel

Fig. A 1

Fig. A 2

Freezer drawer panel

Fig. A

Fig. A 2

11

Image 11
Contents 7083 Electrical connection Setting upAppliance dimensions Appliance venting Water shut-off tap must not sit directly above the socket Installation dimensionsDefinition of Frameless Installation Style Definition of Inset Installation StylePanel dimensions Inset installation style Top View Door swing clearance Inset Installation StyleDoor swing clearance Frameless Installation Style Water pressure Mounting the anti-tipping deviceInstallation Before fitting the door panels Adjusting the front of the drawerLevelling the appliance Fasten the appliance in the recessFig. a Mounting the attachment brackets onto the door panelsFig. B Mounting the refrigerator panelFig. G Mounting the ventilation grille Mounting the freezer panelsMounting the dust filter