Liebherr WU 56 manuel dutilisation Defrosting/Cleaning

Page 14

DEFROSTING/CLEANING

Defrosting

The wine cooler compartment defrosts automatical- ly. The water that forms on the rear wall drains into a reservoir at the back of the appliance and evapo- rates automatically through the compressor heat.

Cleaning

• To prevent possible injury due to an electrical shock, be sure to disconnect the power cord or turn OFF the circuit breaker before replacing the interior light tube or cleaning the appliance.

•To avoid injury or damage, DO NOT use steam cleaning equipment to clean the appliance.

Clean the appliance by hand with lukewarm water and a little detergent.

DO NOT use abrasive or scouring sponges. DO NOT use concentrated cleaning agents. NEVER use abrasive or acid cleaners or chemical solvents or steam cleaners.

•Ensure no cleaning water penetrates into the electrical components or ventilation grille.

•Dry all parts well with a cloth.

•DO NOT damage or remove the model plate on the inside of the appliance. It is very important for servicing your appliance.

Remove any dust from the outside of the ventilation grille (Figure 19) with a vacuum cleaner.

Figure 19

Keep your stainless steel looking new by cleaning with a good quality stainless steel cleaner or polish monthly. High quality stainless steel cleaners and conditioners are commercially available.

DO NOT CLEAN WITH STEEL WOOL PADS or ABRASIVE PADS. DO NOT use cleaners that are not for use on stainless steel, such as glass cleaners, tile cleaners or cleaners used to clean counter tops. These types of cleaners can dam- age the surface permanently.

Stainless steel that is exposed to chlorine gas and moisture may have some discoloration. This discol- oration is normal. If your unit is used in this environ- ment, clean and polish your stainless steel more often.

If the surface discolors or rusting appears, clean it quickly with a non-abrasive cloth and protect it. Always clean and polish in the direction of the grain and finish.

IMPORTANT

Mold can form on the bottles and labels depending on the type of adhesive used on the labels. This can be prevented by care- fully cleaning any adhesive residues off the bottles.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Del frigorífico para vinos For Wine CoolerDe l’armoire à vin réfrigérante Thank you for your trust Table of Contents Disposal of Old Appliance SafetyImportant Safety Information Electrical Safety Disposal of Carton Safety Instructions and WarningsUnpacking Safety Regulations Installation and Fitting Figure InstallationFitting Dimensions Figure Installation Operation Setting the Temperature FigureFan switch Figure Operating Control Elements FigureAudible Warning Signal Figure Additional Functions Figures 9Interior Light Figure Additional Features Pull-out Racks FigureWine Cooler Compartment LabelsStorage Diagram Figure Air Exchange with Activated Charcoal Filter FigureDefrosting DEFROSTING/CLEANINGCleaning Appliance Information TroubleshootingCustomer Service Warranty Liebherr Warranty Plan

WU 56 specifications

The Liebherr WU 56 is a robust, highly efficient wheeled excavator designed for a variety of challenging applications across construction, mining, and infrastructure sectors. This machine is characterized by its excellent performance, versatility, and advanced technologies, making it a notable choice for professionals seeking reliability and efficiency.

One of the standout features of the Liebherr WU 56 is its powerful engine. Equipped with a high-output diesel engine that complies with the latest emission standards, the WU 56 not only delivers impressive power but also ensures lower fuel consumption. This balance between performance and environmental friendliness is a hallmark of Liebherr's engineering philosophy.

The excavator boasts an innovative hydraulic system that enhances operational efficiency. The hydraulic circuits are designed for optimal flow to the various attachments, allowing for smooth and responsive operation. This system includes features such as load sensing and power management, which contribute to the excavator's agility and performance during complex tasks.

The Liebherr WU 56 is also noted for its advanced operator controls and comfortable cab design. The spacious cab provides excellent visibility, ensuring operators have a clear view of their worksite. Ergonomically positioned controls reduce fatigue, allowing for extended operation periods without compromising on comfort. Furthermore, advanced information systems within the cab provide operators with real-time data on machine performance, enhancing decision-making during operations.

In terms of versatility, the WU 56 is equipped with a variety of attachment options, including buckets, forks, and specialized implements for different tasks. This adaptability makes it ideal for various jobs, from digging trenches to lifting heavy materials.

The machine's robust construction and durable components are designed to withstand the demands of rigorous work environments. Liebherr's commitment to quality engineering ensures that the WU 56 can handle tough conditions while maintaining high levels of performance and uptime.

In summary, the Liebherr WU 56 stands out for its powerful performance, advanced hydraulic technologies, operator comfort, and versatility. These characteristics make it a valuable asset for contractors and operators looking to enhance productivity and efficiency in their projects. As construction and excavation needs evolve, the WU 56 remains a reliable choice in the wheeled excavator market.
Top Page Image Contents